1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Cummins Super 250 Power Steering Pump questions

Discussion in 'Trucks' started by Aaron93, Oct 12, 2019.

  1. Aaron93

    Aaron93 Member

    Joined:
    Jul 18, 2018
    Messages:
    21
    Location:
    Georgia
    I have a 1977 Kenworth w900 with a cummins super 250. I saw that I have a pretty bad power steering leak. Does anyone have a parts manual on this thing or could guide me in the right direction? Much appreciated!
     
  2. Truck Shop

    Truck Shop Senior Member

    Joined:
    Dec 8, 2015
    Messages:
    4,115
    Occupation:
    fry cook
    Location:
    SE Washington St
    More than likely it has a Vickers 10 or possibly 20 series pump. But most are 10 and parts are available plus the Vickers pump exploded view and parts can be found online.

    But some photos would be good because in those years it could have Vickers Power Assist using a manual Gimmer steering gear instead of a Ross power steering gear