1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Cummins h743 parts

Discussion in 'General Industry Questions' started by matthew moore, Feb 19, 2020.

  1. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    I recently purchased a galion 118c with a h743 Cummins the plate in front of the fuel pump is missing and it needs new pistons and sleeves any help would be appreciated
    Thank. Matt
     
  2. RZucker

    RZucker Senior Member

    Joined:
    Jul 7, 2013
    Messages:
    4,104
    Occupation:
    Mechanic/welder
    Location:
    Wherever I end up
    Plate? in front of the fuel pump? Need a pic please.
     
  3. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    The plate is missing
     
  4. RZucker

    RZucker Senior Member

    Joined:
    Jul 7, 2013
    Messages:
    4,104
    Occupation:
    Mechanic/welder
    Location:
    Wherever I end up
    Pic please. "plate" isn't much help.
     
  5. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    The plate in front of the fuel pump with all the numbers for the engine is gone not there anymore
     
  6. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    Only thing I can tell u is it was made in 12-6-1959
     
  7. RZucker

    RZucker Senior Member

    Joined:
    Jul 7, 2013
    Messages:
    4,104
    Occupation:
    Mechanic/welder
    Location:
    Wherever I end up
    Should be a number stamped in the block at the rear left hand side just below the cylinder head.
     
  8. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    I look for it next time I go to where it's at I take it I can call Cummins with that number and they can tell me more about if I can still get parts or I can't
     
  9. RZucker

    RZucker Senior Member

    Joined:
    Jul 7, 2013
    Messages:
    4,104
    Occupation:
    Mechanic/welder
    Location:
    Wherever I end up
    Yep.
     
  10. matthew moore

    matthew moore Member

    Joined:
    Jan 12, 2020
    Messages:
    18
    Location:
    Amelia Court House, VA
    Thanks for the help