Truck Shop
Senior Member
Junkyard!
intakes .014
exhaust .027
jakes-.023 Adjust any one that has lash then bar over to set the last ones.
injectors-turn adjusting screw down till it stops to bottom injector plunger, back off and bottom three times.
with injector bottomed turn screw back 120* or two flats and lock it down.
A- injector 1--valves 1
B- " 5-- " 5
C- " 3-- " 3
A- " 6-- " 6
B- " 2-- " 2
C- " 4-- " 4
intakes .014
exhaust .027
jakes-.023 Adjust any one that has lash then bar over to set the last ones.
injectors-turn adjusting screw down till it stops to bottom injector plunger, back off and bottom three times.
with injector bottomed turn screw back 120* or two flats and lock it down.
A- injector 1--valves 1
B- " 5-- " 5
C- " 3-- " 3
A- " 6-- " 6
B- " 2-- " 2
C- " 4-- " 4
