• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

CID skid steer brush cutter review

R

Rio_Grande

Active Member
Joined
Sep 16, 2015
Messages
27
Location
SE Indiana
Mine probably have around 100 on them, unfortunately one side got taken out on a chunk of concrete, the other one has about 4 in of the end worn heavily. They have some vibration
 
D

digger doug

Senior Member
Joined
Nov 2, 2011
Messages
1,420
Location
NW Pennsylvania
Occupation
Thrash-A-Matic designer
Todd v. said:
Changing blades is fun, you have to cut the heads off the bolts. I had to use a 4 1/2" grinder and cutoff wheels last time because I ran out of Oxygen in the torch. I've been getting around 300 hours a set.
Click to expand...

Huh ?

Can't cut a 3" hole in the deck for a socket ?
 
You must log in or register to reply here.
Top