1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Champion 715A info needed

Discussion in 'Motor Graders' started by tinnerjohn, Apr 13, 2019.

  1. tinnerjohn

    tinnerjohn Member

    Joined:
    Jan 11, 2019
    Messages:
    5
    Location:
    Ohio
    Left rear drive quit turning, pulled cover off chain box. Drive chain broken and jamming sprocket. I want to get a service and parts manual for this machine, are there major differences between the 715 and other first series 700 machines? Thanks John
     
  2. DB2

    DB2 Senior Member

    Joined:
    Jan 4, 2015
    Messages:
    270
    Location:
    Winnipeg MB Canada
    Not certain. I believe the larger ones used a number 200 chain though.
     
  3. Silveroddo

    Silveroddo Well-Known Member

    Joined:
    Jun 23, 2010
    Messages:
    224
    Location:
    Northern MN
    Can you get your serial number? I believe the 715 and 720 shared frames and drivelines, a lot of pages in those manuals cover multiple machines.
    I've probably posted this link 20 time on here, but here it is again and it may help you, toward the bottom of the page is a link to a digital 700 series parts manual. You'll need your s/n number to determine if it will help you.
    http://www.sierrapark.org/Equipment/Champion_730A.htm
    Otherwise Ebay is a good resource for reasonable manuals.
     
    bigrus likes this.
  4. tinnerjohn

    tinnerjohn Member

    Joined:
    Jan 11, 2019
    Messages:
    5
    Location:
    Ohio
    Thanks to both of you. I think I found the manuals on ebay. John
     
  5. DB2

    DB2 Senior Member

    Joined:
    Jan 4, 2015
    Messages:
    270
    Location:
    Winnipeg MB Canada
    Great link Silveroddo

    Thanks for posting