Cat excavator322c

[chris byrne]

Hi everyone need help my excavator was flashing up ECM engine error and missing a bit so stop went back to start it few days later now just winds over but will not fire any help would be great

 

[Nige]

Welcome Chris,
To help the excavator experts you could start with a Serial Number. There are probably 30 or more different models of 322C out there.

 

[heymccall]

If I count right, 26?

 

[Nige]

If I count right, 26?

30 adjusted for inflation..

 

[John C.]

You will also need to get access to the diagnostics in the monitor panel. Here is a video that shows how to do that.

 

[chris byrne]

Ok will have a look today for serial number today when I out where it is thanks

 

[heymccall]

Does that hoe have a ground level shutdown switch?
When stringing fuel lines on one of my 330CL, I toggled it as i was unable to finish that day and didn't trust just a lockout tag. Then, I forgot about it. After line installation, it wouldn't start, just crank.

Cost me a dealer road call, and quite a bit of friendly ribbing.

 

[chris byrne]

Hi yes it does below the seat that’s fine that’s no the problem thanks anyway

 

[chris byrne]

Welcome Chris,
To help the excavator experts you could start with a Serial Number. There are probably 30 or more different models of 322C out there.

hey there hope this helps u serial number is DAA00147

 

[Nige]

hey there hope this helps u serial number is DAA00147

Did you manage to get into the Service Menu to look at the Fault Codes yet.?

 

[chris byrne]

No not yet when I get a chance i will and let you know

 

[chris byrne]

These are the actual codes