1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

CAT dozer blade attachment wiring help, please

Discussion in 'Construction Equipment Attachments' started by RRBuilder, Jun 2, 2019.

  1. RRBuilder

    RRBuilder New Member

    Joined:
    Jun 2, 2019
    Messages:
    3
    Location:
    Arkansas
    I bought a CAT dozer blade attachment (model# 231-5275) that is missing the wiring harness. Seller said one of his cows ate it. I pulled the cover off the solenoids and found what was left, and attached new wires. There are 2 solenoids, each with 2 wires. I need help understanding how the two solenoids should be wired to control blade tilt and angle. Each solenoid makes a sound when wired to 12 volts.

    I won't bore everyone with what I've tried to date. To keep the message simple, if someone can tell me or provide a copy of the wiring for this attachment I would be greatly appreciative.

    I will be using this on my Bobcat T200 skid steer that has a 14 pin connector, I am familiar with what each pin does, that's not the issue.
     
  2. RRBuilder

    RRBuilder New Member

    Joined:
    Jun 2, 2019
    Messages:
    3
    Location:
    Arkansas
    Here's a picture of the solenoids, in case that will help... Dozer solenoids.jpg