06bowtie_guy
Well-Known Member
My buddies boss just bought this unit. http://usedcat.toromont.com/default.asp?SID=%7BB9A151C9%2D0557%2D4A8E%2D96A4%2D39C3C5BAD497%7D&MP=modules%2FUE%2Fdetail%2Easp&menuid=1&UEGroupId=7&UEGroup=Wheel%20Loaders&LocId=&LocDisplay=&LocParams=&DisplayModelKeyword=&SortDirection=Asc&SortField=SortOrder%2C+DisplayModel&EquipManufCode=AA&DisplayModel=924G&SerialNumber=0DDA01856
Went to check it out and test it today. Sweet machine, that longer boom is nice to stack snow and load trucks. Traded in a 89 ish IT28 for it.
Anyways does anyone with a cat have pictures of how the hoses are run to the tool carrier section? Currently the aux hoses run down the boom and end. We noticed there is a location on the part that hooks up to the bucket or forks for the quick couplers to go. It would appear the hoses should run the same way as the securing pin hoses??
Hope I make sence, if not I will try to take a picture tomorrow.
Thx.
Went to check it out and test it today. Sweet machine, that longer boom is nice to stack snow and load trucks. Traded in a 89 ish IT28 for it.
Anyways does anyone with a cat have pictures of how the hoses are run to the tool carrier section? Currently the aux hoses run down the boom and end. We noticed there is a location on the part that hooks up to the bucket or forks for the quick couplers to go. It would appear the hoses should run the same way as the securing pin hoses??
Hope I make sence, if not I will try to take a picture tomorrow.
Thx.