1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

cat 906 Rear differential backlash

Discussion in 'Compact Wheel Loaders' started by 2low, Feb 16, 2015.

  1. 2low

    2low New Member

    Joined:
    Nov 28, 2011
    Messages:
    4
    Location:
    ontario canada
    can someone tell me what the specs are for the cat 906 rear diff backlash is ?
     
  2. Cmark

    Cmark Senior Member

    Joined:
    Jan 2, 2009
    Messages:
    2,325
    Location:
    Australia
    Rolling torque on the pinion is 14-28 in/lb. Rolling torque with crownwheel installed is whatever the pinion torque was plus 4-7 in/lb. Backlash is 7-9 thou.