1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Cat 3054C timing

Discussion in 'Generators/Gensets' started by mattyt1984, Apr 13, 2020.

  1. mattyt1984

    mattyt1984 Well-Known Member

    Joined:
    Jun 5, 2011
    Messages:
    137
    Location:
    New York
    How do you set the timing on a cat 3054C arrangement 219-7588 serial 33405425? I have to rebuild this engine as it has a broken crankshaft. I see no timing marks on the crank gear.
     
  2. Mark250

    Mark250 Senior Member

    Joined:
    Aug 30, 2015
    Messages:
    1,044
    Occupation:
    heavy equipment technician
    Location:
    victoria,Australia
    timing pin holes under front cover two timing pins required.
    pin punch's or long bolts work as well