dist3
Well-Known Member
- Joined
- Mar 23, 2008
- Messages
- 110
- Location
- Connecticut
- Occupation
- Equipment Manager Enviromental and Site Contractor
Anyone have an idea what would cause C13 to take 3-5 attempts at firing before you get engine to fire. Only happens after grinder sits for a week or so. If we run it daily it fires right up. Have checked connections from tank to engine. Filters are all tight. Installed block heater but problem can happen if its 60 F or 28 F temperature out. Checked primer pump and good resistance when it fails to start. Operator panel does not show code.