1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Case W20C engine installation

Discussion in 'Wheel Loaders' started by KTRasch, Oct 3, 2020.

  1. Vetech63

    Vetech63 Senior Member

    Joined:
    Aug 10, 2016
    Messages:
    2,860
    Location:
    Oklahoma
    Im going to just sit here and watch you guys at work.;)
     
    Tugger2, Tinkerer and mg2361 like this.
  2. john hofer

    john hofer Well-Known Member

    Joined:
    Nov 24, 2014
    Messages:
    106
    Location:
    Viking alberta, canada
    Had a similar problem with a john deere where the flywheel was catching on the starter turned out be a bent crankshaft and worped block
    $$$$
     
  3. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    5,695
    Location:
    On A Riverbank in IL. USA
    I'm done working on this one. :)