1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

CASE 1818 MINI LOADER

Discussion in 'Mini Skid Steers' started by Kenny Hetrick, Mar 16, 2019.

  1. Kenny Hetrick

    Kenny Hetrick New Member

    Joined:
    Mar 1, 2019
    Messages:
    3
    Location:
    5359 Fremont pike Perrysburg Ohio 43551
    left controls won't work, will only turn to the right. The hydraulic pumps are so expensive, need suggestions on what to do. Haven't seen any hydraulic leaks, its filled with oil.Has a 18 h.p gas engine. Belts are tight. I have the service Manual, but no gages to check pressure.
     
  2. DIYDAVE

    DIYDAVE Senior Member

    Joined:
    Feb 18, 2007
    Messages:
    2,072
    Location:
    MD
    You might have a sheared key or a busted chain, on the non working side, have you checked them?;)