1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Case 1150e rear hydraulic outlets

Discussion in 'Dozers' started by corey1980, Sep 10, 2022.

  1. corey1980

    corey1980 Member

    Joined:
    Sep 3, 2017
    Messages:
    10
    Location:
    Monmouth Illinois
    Have a case 1150e dozer with a 6way blade. I'm looking for a kit to add rear remote hydraulics to raise and lower a disc. Can I find the same dozer in salvage with a rear ripper and use the valve and lines. Open for any suggestions. Thanks
     
  2. Dave Neubert

    Dave Neubert Senior Member

    Joined:
    Jul 18, 2018
    Messages:
    1,204
    Location:
    Monroe NC
    if it has stackable valves you can just add a valve and get longer studs
     
    Coy Lancaster and D5Dan like this.
  3. Coy Lancaster

    Coy Lancaster Senior Member

    Joined:
    Dec 19, 2014
    Messages:
    1,734
    Occupation:
    service tech
    Location:
    Arkansas
    Go to the Case parts website and find the part number for ripper valve section and the longer studs.