1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Case 1150b

Discussion in 'Dozers' started by miller125, Apr 6, 2021 at 8:38 PM.

  1. miller125

    miller125 Member

    Joined:
    Jun 17, 2018
    Messages:
    24
    Location:
    Indiana
    Are these machine supposed to have transmission pressure on the gauge while in neutral or is it just when fwd or rev is selected
     
  2. lantraxco

    lantraxco Senior Member

    Joined:
    Jan 1, 2009
    Messages:
    7,457
    Location:
    Elsewhen
    As I recall only when actually in gear. YMMV
     
  3. alrman

    alrman Senior Member

    Joined:
    Jun 20, 2009
    Messages:
    2,889
    Occupation:
    Diesel Fitter;Small Business Owner;Cleaner
    Location:
    QLD Australia
  4. miller125

    miller125 Member

    Joined:
    Jun 17, 2018
    Messages:
    24
    Location:
    Indiana
    Thank you guys I was checking to make sure