1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Bobcat T770 2 speed issues...

Discussion in 'Compact Track/Multi Terrain Loaders' started by Kevin Cohrs, Aug 11, 2021.

  1. Kevin Cohrs

    Kevin Cohrs Well-Known Member

    Joined:
    Apr 24, 2020
    Messages:
    99
    Location:
    Glencoe, MN
    2013 Bobcat T770. Was driving the machine today in 2 speed when suddenly it slowed down and went back into low. The rabbit light is still on but it doesn't make any difference if I click it from low to high speed. Anything I could easily check? Would it throw a code if something was wrong? Thanks
     
  2. skata

    skata Senior Member

    Joined:
    May 10, 2007
    Messages:
    1,265
    Location:
    midwest
    Check a relay, or solenoid?
     
  3. gwhammy

    gwhammy Senior Member

    Joined:
    Nov 21, 2013
    Messages:
    362
    Location:
    missouri
    How many hours on it?
     
  4. Kevin Cohrs

    Kevin Cohrs Well-Known Member

    Joined:
    Apr 24, 2020
    Messages:
    99
    Location:
    Glencoe, MN
    3000. Weird thing is I tried it the day after and everything works just fine....
     
  5. skata

    skata Senior Member

    Joined:
    May 10, 2007
    Messages:
    1,265
    Location:
    midwest
    Sounds like electrical issue. A warm relay or solenoid letting go.
     
  6. gwhammy

    gwhammy Senior Member

    Joined:
    Nov 21, 2013
    Messages:
    362
    Location:
    missouri
    I have had older machines wear the supply pump out that switched them into high. This was on the 863 series and it was usually around 2500 hours.