1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Bobcat 2000 hydrostat ?

Discussion in 'Compact Wheel Loaders' started by Wagner Farms LLC, Feb 15, 2020.

  1. Wagner Farms LLC

    Wagner Farms LLC New Member

    Feb 15, 2020
    Monroe Center MI
    I recently picked up a bobcat 2000 wheel loader. The hystats are extremely jumpy to the point is dangerous to operate. I've taken out a lot of slop in the linkage but i'm looking for info on how the servo is supposed to control things. Is the arm on the front pump for travel and the arm on the rear for something else? I have ordered the book but i was hoping someone might have the theory of operations handy i could look at till it arrives.
  2. mikebramel

    mikebramel Senior Member

    Jul 16, 2012
    Check the charge pressure.... inlet hose between the tank/ charge pump inlet..... possible strainer or filter before the fluid hits the loop