1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

attachments

Discussion in 'General Industry Questions' started by Harrix, Mar 8, 2017.

  1. Harrix

    Harrix New Member

    Joined:
    Mar 8, 2017
    Messages:
    1
    Location:
    Bowral
    i have a jib crane attachment which suits a 22t kobelco
    pins are 70 mm
    530 mm centers and
    330mm between the ears

    will this suit any other machines
    i have done research but cant find all the correct info i need
     
  2. farmboy555

    farmboy555 Well-Known Member

    Joined:
    Aug 25, 2006
    Messages:
    178
    Occupation:
    Owner Operator
    Location:
    KY
    I'm sure you can do a little work and make it fit. I have a mini with a quick attach for the bucket it will take bucket pin from 1" to 1 3/8" had an bucket with 1 1/2" pins. I put the in the lathe and turned the center of the pins down to 1 3/8". This just happened to be an easy fix