1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Anyone know of a Terex later model scrapers parting out in North America?

Discussion in 'Scrapers' started by Questionable wizard, Jan 20, 2022.

  1. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    120
    Location:
    Ohio
    Looking for parts that would fit a TS14D, DII, F, G.

    I need a Funk DF150 transmission core. I have one that was pushed to the crunch point and needs many gears and shafts. I rebuild my own transmissions. Not looking for refurbished.

    Also looking for the HVAC enclosure/assembly that fits the cab of a TS14F or G.
     
  2. Spud_Monkey

    Spud_Monkey Senior Member

    Joined:
    Sep 15, 2018
    Messages:
    3,460
    Location:
    .
    Here you go... https://www.bismanonline.com/upham_nd/terex_ts14_scraper_rear_engine_is_removed_but_co
     
    John C. likes this.
  3. Questionable wizard

    Questionable wizard Well-Known Member

    Joined:
    Feb 10, 2018
    Messages:
    120
    Location:
    Ohio
    Appreciate the input. Nothing on that machine will fit mine. Too old.
     
    Spud_Monkey likes this.
  4. heymccall

    heymccall Senior Member

    Joined:
    Feb 19, 2007
    Messages:
    3,574
    Location:
    White Oak, Pa
  5. hseII

    hseII Member

    Joined:
    Aug 9, 2014
    Messages:
    22
    Location:
    Georgia
    On Facebook
    https://www.facebook.com/marketplace/item/679023940174641/
     
  6. traxcavator

    traxcavator Active Member

    Joined:
    Feb 22, 2014
    Messages:
    27
    Location:
    NC
    The Ironpeddlers in Monroe,NC parted out a 14D 10-12 years ago, I’m not sure what’s left of it, but you could check with them.
    https://www.ironpeddlers.com/