1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Another Test

Discussion in 'Test Forum' started by Tinkerer, Nov 23, 2021.

  1. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA
    Didn't work.
     
    Last edited: Nov 23, 2021
  2. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA
    This time either.
     
  3. Steve Frazier

    Steve Frazier Founder Staff Member

    Joined:
    Oct 31, 2003
    Messages:
    6,126
    Location:
    LaGrangeville, N.Y.
    What is it you're trying to do?
     
  4. kshansen

    kshansen Senior Member

    Joined:
    Mar 11, 2012
    Messages:
    9,703
    Occupation:
    Retired Mechanic in Stone Quarry
    Location:
    Central New York, USA
    Yea, give us a hint at what the attempt is for and I'm sure someone can get the answer to you.

    Or try a "Start a Conversation" with one of us and we can work on it from there!
     
  5. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA
    Create a hyperlink.
    A hyperlink can be as simple as one word or several.
    I see them posted here from time to time.
    Pasting a web-address in the link creator (looks like a chain link) that is in the toolbar at the top this message only results in the full web-address getting posted.
    As most of you reading this most likely know that the toolbar does not appear in a message after it is posted.
    If you use gmail it has a quick simple way to create a hyperlink in a new message.
    This is an image of the link creator that is available in all HEF new un-posted messages.
    pink.jpg
    I may be doing something wrong but I can't seem to create a hyperlink with it. I may as well just paste the web address in any message I create.
    I think hyper-links make messages easier to read and look uncluttered.
    Below is a gmail hyper-link creator and it works quite well.
    gmail.jpg
     
    Last edited: Nov 25, 2021
  6. Bootheal

    Bootheal Well-Known Member

    Joined:
    Apr 27, 2015
    Messages:
    197
    Location:
    Jackson, MO
    What did you say?

    Break out the Flux Capacitor, he’s gone over the edge!
     
  7. Steve Frazier

    Steve Frazier Founder Staff Member

    Joined:
    Oct 31, 2003
    Messages:
    6,126
    Location:
    LaGrangeville, N.Y.
    If I'm following what you're saying correctly I believe I have that function disabled. There have been too many times in the past where a photo hosted by hyperlink has been removed and then we have a thread with a bunch of red X's. If pictures are to accompany a thread they must be loaded to our server so they may be enjoyed indefinitely.
     
    DMiller likes this.
  8. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA
    Aha!
    Thanks Steve.
    That explains it.
    I know it is a trivial thing. Computer challenges are like waving a bone in front of a dog for me.
    I keep after them until I figure it out.
    Kinda like Vetech and his ongoing dilemma with all the work left to him by the dummies he has to work around.
    20 minutes after I posted this --- I found a hyperlink to the CNH parts book. It was posted by alrman. :)
    He has it figured out ! Just like anything made by Case.
    https://www.heavyequipmentforums.com/threads/case-580se-parts-manual-index.91765/#post-1006109
     
    Last edited: Nov 25, 2021
    DMiller likes this.
  9. Tinkerer

    Tinkerer Senior Member

    Joined:
    May 21, 2009
    Messages:
    6,929
    Location:
    The shore of the illinois river USA