jimg984
Senior Member
THANKS FOR REPLIES
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Advice for welding repair of 4 in 1 bucket
- Thread starter Scout_1969
- Start date
JL Sargent
Senior Member
I found this 309 rod on Ebay. This rod or a similar one should work on your stick welding machine.
https://www.ebay.com/itm/293700597527?hash=item4461eb7717:g:7IcAAOSwX4BfQCzE
https://www.ebay.com/itm/293700597527?hash=item4461eb7717:g:7IcAAOSwX4BfQCzE
Welder Dave
Senior Member
One of the experienced Tig welders on the Welding Web swears by 312 stainless for any difficult to weld steels. Just stainless to mild steel 309 is good without the added expense.
I would buy rods from a local welding supply instead of online. Heard a few stories where the rods were thrown around and the flux was chipped off on several rods despite having fragile handle with care labeling. Radnor is a private label for Airgas and the rods likely come from overseas. A lot of welders prefer name brand stainless rods like Avesta.
I would buy rods from a local welding supply instead of online. Heard a few stories where the rods were thrown around and the flux was chipped off on several rods despite having fragile handle with care labeling. Radnor is a private label for Airgas and the rods likely come from overseas. A lot of welders prefer name brand stainless rods like Avesta.
Last edited: