1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

advice construction rake ripper design for artisanal excavator

Discussion in 'Other Earthmoving Equipment' started by trombeur, Oct 31, 2018.

  1. trombeur

    trombeur Senior Member

    May 2, 2014
    hello, we will have to clean up a long abandoned agricultural land, for this purpose we will use a six ton excavator, with the standard bucket we lose a lot of time, they advised us to adopt the bucket rake ripper, ie a wide bucket type rake comb that hollowed out of the ground roots and stones very wide stones, like bucket clean ditches, it costs an eye so we would like to make a rake craft using a bar profiled steel, about fifteen twenty millimeters thick to weld some pieces of steel rod long forty fifty centimeters, some consanguine or example of an example already done in the home by hand, thanks for the attention rastrello ripper.jpg rastrello.jpg rastrello.jpg