1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

98 Ingersol Rand Roller - Need Information

Discussion in 'Other Paving Equipment' started by ms0115, Oct 16, 2019.

Thread Status:
Not open for further replies.
  1. ms0115

    ms0115 Senior Member

    Joined:
    Mar 3, 2014
    Messages:
    264
    Location:
    Ethridge, TN
    98 Ingersol Rand SD- 70D Pro PAC
    154293

    This roller was recently acquired from an auction. The roller will not completely disengage the vibrating function. If you push the button on the stick it will slow the function down, but will not stop it. I have unhooked the switch and that made no difference. I've unplugged the electrical connections at all locations for the hydraulic system and this has had no effect.Any input would be much appreciated.
     
  2. digger242j

    digger242j Administrator

    Joined:
    Oct 31, 2003
    Messages:
    6,268
    Occupation:
    Self employed excavator
    Location:
    Southwestern PA
Thread Status:
Not open for further replies.