1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

460 international

Discussion in 'Agricultural Equipment' started by petepilot, Mar 23, 2022.

  1. petepilot

    petepilot Senior Member

    Joined:
    Jul 7, 2018
    Messages:
    1,988
    Location:
    central shenandoah valley va,
    have a 460 int. set up as a factory fork lift not sure of its yr. model. looking for info on the brake system on this thing .
     
  2. icestationzebra

    icestationzebra Senior Member

    Joined:
    Jun 21, 2009
    Messages:
    354
    Location:
    WI
    Those look like the same brakes as the M/400/450 but the part numbers don't match. The attached document says they have the same set-up as a 560. If the adjustment nuts are down all the way you need new pads. Our 400 could drive thru the brakes so they often got hot going down the road! :) You can also get the shop manual pretty cheap. ISZ
     

    Attached Files:

  3. petepilot

    petepilot Senior Member

    Joined:
    Jul 7, 2018
    Messages:
    1,988
    Location:
    central shenandoah valley va,
    thanks for the reply. I found a book on the subject and also some nos parts just a few miles from me