1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

3456 Caterpillar . Advice please

Discussion in 'Generators/Gensets' started by jett01, Apr 12, 2017.

  1. jett01

    jett01 Well-Known Member

    Joined:
    May 19, 2016
    Messages:
    54
    Location:
    Swan River , Manitoba
    hello . I am possibly buying a2003 3456 410prime KW genset . It has approx 22000 hours on it and it looks to be in very good shape . The bearings were done approx 10000 .
    I am asking if anyone here on this forum has any trouble with the 3456 . I would be replacing my 3406C with more than 33000 hours on it . My bearing has dropped and unfortunately it has a grounding issue . Any help or advice would be greatly appreciated.
    Sincerely
    J