1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

2015 toro dingo 323 wont start

Discussion in 'Mini Skid Steers' started by Jb67, Mar 13, 2020.

  1. Jb67

    Jb67 Member

    Joined:
    Jan 12, 2020
    Messages:
    5
    Location:
    Delaware
    I have a 2015 toro dingo 323 (gas model with Koehler engine) won’t start. I have changed the battery, changed voltage regulator, and all it does is crank like the battery is dead and engine does not turn over. Every once in a while I can jump start it with jumper cables but some times even with cables hooked up it still will
    Only crank and make noise like the battery is dead. Any ideas?
     
  2. MarshallPowerGen

    MarshallPowerGen Senior Member

    Joined:
    Nov 27, 2017
    Messages:
    265
    Occupation:
    Diesel & Generator Mechanic
    Location:
    Coeur d'Alene, Idaho
    Check your cable connections; everything from battery positve to the post on the starter and your battery negative to ground. Any access to a meter to see what the voltage is actually doing?
     
  3. Ronsii

    Ronsii Senior Member

    Joined:
    Jun 26, 2011
    Messages:
    3,544
    Occupation:
    s/e Heavy equipment operator
    Location:
    Western Washington
    Starter could be going bad also... does the starter get really hot after 20-30 seconds of cranking? or smell hot...
     
  4. PeterG

    PeterG Well-Known Member

    Joined:
    Apr 15, 2015
    Messages:
    175
    Occupation:
    Landscape Construction, General Contractor
    Location:
    Seattle WA, United States
    Make sure the Aux level has not been left on. I also had an issue with the parking level - Look for Auto kill/safety switches.