1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

2013 Cat TL 943C Help with Codes

Discussion in 'Forklifts/Telehandlers' started by Dalmatia, Sep 5, 2019.

  1. Dalmatia

    Dalmatia Member

    Oct 28, 2017
    Just replaced turbo and I'm getting message on dash with red light flashing next to the gauges,how do I clear them and where do I start to troubleshoot.
    Tried disconecting the battery but that didn't work.

    Canbus Fault Signal Invalid