2001 hitachi 75ur

[Bad billy]

Thinking about buying a 2001 excavator (hitachi 75 ur)
Is a good machine ?roughly 6000 hrs ,needs new track tensioner,one cylinder leaking,probly get this machine for around 22000 $ Canadian.
What is the key things to check for on my inspection before buying ?help would be appreciated..thanks

 

[Bad billy]

Is it worth the 22000

 

[uffex]

Good day Billy
See attached may be what you are looking for, mail the results back to us, and we add some good advice.
Kind regards
Uffex

 

[Bad billy]

Thank-you very much …very helpful

I bought the machine for 18k

needs a track tensioner and 1 top rollers

Brian

 

[Bad billy]

The swing motor/pump was low on the dipstick .I don’t see a place to fill …any ideas?

 

[uffex]

Good day Brian
Looks as filling is by the spout for the stick.
Kind regards
Uffex

 

[Bad billy]

Good day Brian
Looks as filling is by the spout for the stick.
Kind regards
Uffex

 

[Bad billy]

Thank-you very much

 

[uffex]

Hi Brian
I have been informed that there is a plug 180 degrees from dip stick can be used to fill the tranny.
Kind regards
Uffex

 

[Bad billy]

Uffex

Thanks for all this information,I really do appreciate it .I have another question for you.Where would you order parts for this machine .Is there a company in North America that has great service and prices?

 

[uffex]

Good day Brian
Many parts can be sourced in the open market - relays - switch's and the like. Transmissions need to be identified often these can be sourced from sub suppliers or indeed machine dismantling yards. I do not know of an outfit in the USA that specialists in Hitachi parts. Engines are very similar to generator - marine spec. so these should not present any problem. On the HEF you have some very good John Deer tec. guys often they can give you a cross reference which may open another source for parts.Great if you could take a photo or two we do not have so much on filke.
Kind regards
Uffex

 

[Bad billy]

I found my parts for the under carriage …6 weeks to come in ..changing both track adjusters and all rollers .

Blew a hose this morning on my blade .
Do any any of you kind folk out there have a hose diagram 0n when this hose goes ?

 

[Bad billy]

View attachment 259606 View attachment 259607 View attachment 259608 I found my parts for the under carriage …6 weeks to come in ..changing both track adjusters and all rollers .

Blew a hose this morning on my blade .
Do any any of you kind folk out there have a hose diagram 0n when this hose goes ?

I figured it out .
Now I’m looking for a good part/service manual .I can’t find nothing on the net

 

[uffex]

Good day brian
I have a contact with a dash 3 service manual it may cost a six pack as the barbecue seaon has started here.
Kind regards
Uffex

 

[Bad billy]

Good day brian
I have a contact with a dash 3 service manual it may cost a six pack as the barbecue seaon has started here.
Kind regards
Uffex

Where do I send the 6 pack

 

[Bad billy]

-3 ,is that 3rd generation ex75ur.Will info on a -3 work with the 2001 ex75ur

 

[uffex]

Hi Brian
I cannot be sure what year's the EX75-3 UR relates to, I believe 1997 > 2001. As models get updates, they tend to be superficial & cosmetics, so there could be minor differences. PM me your Email if I should request a copy (It's digital to download)
Kind regards
Uffex

 

[Bad billy]

Ok done ,Thankyou very much

what a great site this is

Brian