1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

1997 genie z45 slow moving

Discussion in 'Forklifts/Telehandlers' started by AColeman, Mar 26, 2020.

  1. AColeman

    AColeman Member

    Joined:
    Oct 28, 2014
    Messages:
    13
    Location:
    Maine
    Serial z45-00-6307 All boom and swing movements are slow when powered by machine. But when I use the back up auxiliary everything is way faster. Any clue why this like that? My level sensor seems to be broken is the a way to bypass to test? My travel speeds work from slow to fast but fast doesn’t seem much of a change.
     
  2. Txhayseed

    Txhayseed Well-Known Member

    Joined:
    Dec 23, 2019
    Messages:
    69
    Location:
    Texas
    Page 132 in the service Manuel tells you to test and trim out rates. Your may be out of spec and in need of calibration to get back inline.
     
  3. AColeman

    AColeman Member

    Joined:
    Oct 28, 2014
    Messages:
    13
    Location:
    Maine
    Any chance you have photo of that page?