1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

1986 c30 roll back tow truck blowing the seals out the hydraulic

Discussion in 'Trucks' started by Tomcat955, Jun 9, 2022.

  1. Tomcat955

    Tomcat955 Member

    Sep 12, 2021
    Hey I’ve got a old c30 roll back tow truck. Seems like whenever the bed bottoms out it blows the seal clean out the rear of the hydraulic. We tried repacking it twice and every-time it over pressurized and boom goes the seal and bushing right out the back. Any idea what could be causing this? 3B3B7455-B76E-4223-B7A2-DEABECFF2876.jpeg FB2C9CDA-D185-46F0-A40B-C6CD56BF285C.jpeg