1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

1982 Champion 710A With Cummins 378 Motor

Discussion in 'Motor Graders' started by Jeremy Linjdstrom, Nov 15, 2022.

  1. Jeremy Linjdstrom

    Jeremy Linjdstrom New Member

    Joined:
    Nov 15, 2022
    Messages:
    3
    Location:
    Oregon
    Good Afternoon everyone ... New to forms but im working on a Cummins V-378-C in a 1982 Champion 710A road grader. Another guy pulled it apart to do the injectors and left. My questions are is there a specific direction to drop the injectors in. Also what is the toruqe specs for the rocker arms and is the a sequince to tighten the 4 bolts down. Thanks for any help!

    There is a wear mark threw the ESN on the valve cover and i cant seem to find one on the block in the locations i have found to look on here.