• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

nige

  1. Self-Jameel

    CTA 8.3 Cummins

    Pls folks I need help, too much air coming out of the engine crankcase, for a newly built (overhaul) engine A new turbo charger as well,what might likely be the problem
  2. James Sorochan

    Whats the difference between low horse and high horse Cat D339 engines?

    I see a 1968 D339 parts engine on Kajiji up Edmonton way. I have a 1963 low horse. Are there any common parts between the two? The guy selling it said two cylinders are seized up due to exposer to the elements when head was off it sitting outside for a couple years. He also said block and crank...
  3. A

    CAT 140H grader

    Hi Nige I need partnumbers for front wheel studs, washers and nuts 140H grader please. I dont pic it up on SIS or CAT parts lookup.. Serial number 5HM03095
  4. T

    04 caterpillar 953c final drive oil type

    I recently purchased a 953c . after check the final drive oil I noticed one side was alittle grey in color . so I decided to drain it and refill and check after running and more then likely drain again to make sure I get all the old oil out . I have figured out that it takes to-4 sae50 and I...
  5. Self-Jameel

    D8K POWER SHIFT (RIPPER NOT DROPPING EVENLY)

    Hello lovely people, pls I need help working on a D8K(power shift) Try but couldn't source for the machine Serial number. Rebuild the hydraulic pump and the pressure is ok .Try raising the blade is responding well but the problem is the ripper, it's not dropping or raising evenly likewise...
    • Self-Jameel
    • Thread
    • coaldust diesel dave jd955sc nicki 68a nige
    • Replies: 4
    • Forum: Dozers
  6. Self-Jameel

    16G Motor Grader (49G869)

    Please need help in identifying the type of engine mounted on it and the possible procedure (do and don't) of finding the engine TDC... Also I manage to source this engine block part number (7S3600). Tho not so sure about the machine serial number hence why I added the block P/N. No one knows...
  7. C

    caterpillar d5g ecm is deprogrammed

    I have a 2003 Cat D5Glgp that has a right lane lock issue, only when backing up. I looked in the forum and I did not find a solution, it gives me the ET and it gives me these error codes, the post calibration is done and works perfectly until the problem is turned off and on again. and the...
  8. S

    140H Grader VHP Plus Gear 1,2,3 Not Working

    Hi Everyone Good Morning Actually My grader 140h’s gear number 1,2,3 is not working properly Sometimes i get pressure in no 3 (Reverse) Sometimes in no 1 and sometime in no 2 I repaired the transmission i changed the valve There is no code in ETA Main pressure is ok Sometimes is give me...
  9. J

    D5B Ser# 22x00460 Steering issues lost right and left turn

    Customer has an old D5B that parked it for about 6 months then went to use it and it will not turn right or left, mind you this has the manual transmission hand clutch etc. He does not have access to his book right now, cause it got loaned out, I can’t believe there is another one of these...
  10. F

    830E Komatsu Trucks Service

    Hello everyone, can I please ask about 830E Komatsu Trucks. These trucks have Cummins Engines MCRS. It seems Cummins or Komatsu recommends on 1000 and 3000hr services.Is this healthy for these engines considering the dusty environment they operate in. Most OEM recommend 250, 500 and 1000hr...
  11. Sameh

    966L unable to find an exact match for the transmission software

    Hello, does anybody met any message like that attached message? Be informed that it appeared after updating the transmission flash file. All ecms are updated to the last flash file except the information display. It doesn't accept the flash file and show the second attached image. Anybody has a...
  12. N

    3406c information

    hey guys! ok so I picked up a 3406c and im gonna use the engine for another truck. its bone stock with 398,000 miles. the wiring harness is crap and i found a harness from Cat for $488 but i also have the option to convert it to mechanical. my father in law has a B model pump i can use. now my...
  13. J

    Cat d6n xl no electrical power

    D6n xl Ghs00776 I have no power no lights buzzers no key response etc. Batteries are good. (Voltage and load tested) Have 24 volts at the starter and also both sides main power relay all fuses are good. The instrument panel will show hours when any button is pressed and that's all. 7104 hours...
  14. T

    cat 955l torque temp guage face turning grey and appears to suck in

    I'm hoping someone can give me some ideas of what could be causing my torque converter temp guage to turn grey and with in 80 hours be completely grey where unable to read . I recently had trans rebuilt ,new hydraulic pump oil pump and trans cooler installed along with a new cat torque temp...
  15. F

    WA900

    Can I please ask information about a WA900 loader. The H frame was put on stands to allow for bucket repairs.The machine was in for a service too and the hydraulic oil was accidentally drained while the frame was still on stands meaning the lift cylinders had a bit of oil in them.Is it possible...
  16. B

    Cat247b how to operate auxilary hydraulics

    I can figure out how to lock auxilary hydraulics on my brush cutter. Also my brush cutter only wants to run in reverse. After running for about 10 minutes my water temp goes off saying overheating. Please help
  17. E

    Overheating Perkins 1004-4 turbo engine

    I have perkins engine on a backhoe and temperature builds to 100 degree Celsius within 20 minutes. Have done the following so far without any improvement: changed water pump, blocked bypass from thermostat housing to water pump inlet, cleaned radiator, replaced fan, pressure test block and head...
  18. F

    Cat 980H bucket dropping

    Please help, our Cat 980H serial number AKZL01012 is dropping the bucket when moving with load in the bucket.This is only happening when moving and it’s not doing this all the time. Thank you
  19. R

    Skid Steer right joystick problem

    Can anyone out there tell me if the roller switch (proportional auxiliary) on the right joystick that operates the auxiliary hydraulics is only a one way switch option on some skid loaders or comes standard 2 way for all of them. The reason I'm asking is because I just purchased an attachment...
  20. T

    Dropped hydraulic pump in 30 sae oil

    Hey guys.. so working on a cat 955l. In the process of taking the hydraulic pump out the pump slipped and fell into a oil drain bucket that had hydraulic and sae 30 oil in it ...my question is will it hurt any thing if a little 30 sae oil got in the hydraulic pump ? I have let the pump sit...
Top