• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

joystick

  1. D

    Bomag 2016 BW177D3 Joystick and Fuel Pump Issue

    Since purchase we have had a loose joystick that doesn't automatically return to the neutral position. The engine revs unusually (pulsing) when idling and in operation. We replaced the governer and still had no change. Believe the engine is Cummins B4.5-80C. When the joystick finally gave up...
  2. D

    Genie S-60 Drive/Steer Joystick issues

    I own and service my own 2006 S60 Genie Perkins powered Lift SN:6006-13542 which is suddenly generating error codes 51-17 for Drive stick and 61-17 for Steer stick. As a result, my Steer/Drive joystick is now INOP. I have the appropriate service manual and schematics. I am well versed in...
  3. P

    Case tr320 code (4752)

    My skidsteer is throwing the 4752 code (command plausibility check in manual) Which I believe is the left joystick. It wont move and the red STOP light is flashing and beeping. I have checked and cleaned most of the wiring harness. I have pulled both swashplate sensors off and cleaned them...
  4. G

    Caterpillar 226B drive joystick testing

    Hey, my machine is a 2008 with 2700hrs. The left joystick is very slow to react and also overreacts. The right joystick is perfect and works like a charm. Both have very slight external sweating, but nothing I would consider a “leak” From forward to reverse or reverse to forward, it has a full...
  5. G

    Cat 226b2 Skidsteer Left Joystick problem

    Hey, I'm new to the forum, and I'm in the market to buy a skidsteer. I'm in contact with a guy a few hours away who has a 2011 226B2 with 2700hrs. Says everything on the machine operates like it should, they replaced the fuel pump and injectors 2 years ago. Sounds like everything drives...
  6. 01Time

    Aftermarket Joysticks?

    While using my Cat 246 yesterday one of the buttons on the right joystick popped off. The edges around the button were missing (and it was merely held on by friction?). I looked high and low, but could not find it. I really don't want to spend $900 for a new joystick when there are no issues...
  7. S

    Australia which Forestry head for T870 Bobcat

    Gidday from Australia, my son runs a T870 100HP low/hi flow Bobcat and I'm doing the homework as usual (my choice was the 870 including rippers and setup for joystick control, he loves it) anyhow we need a big forestry head to do clearing work for Electricity line company and general regrowth...
  8. T

    JD 333D joystick issue

    After starting the skid steer, I attempted to activate the hydraulics. An active code appears: 2213.09 - Left joystick CAN Data Abnormal Rate With the code present, It won't allow me to activate the hydraulics or the tracks so its stuck out in the field until I can get it fixed. Oddly, prior...
  9. M

    Fermeco 960 no control

    I have problem with my backhoe loader Fermeco 960,98 year, buzzer ring and alarm is on, I don't have control with joystick, there is electric joystick on machine, problem started after I washed machine, please help ? Regards, Milos
  10. S

    Bobcat T590 with limp joystick

    Got a bobcat with under 70 hours. Scraping sod for about a half hour and had the left joystick go totally limp. It falls forward and left track has no power. I have hand controls but I assume the problem is either in the hydraulics or the steering linkage. Maybe a power issue but seems unlikely...
  11. C

    2016 CAT 259D right joystick

    Any one know if i can swap out a right joystick that just has thumb wheel. For a new right joystick that has the 2 buttons next to the thumb wheel (using CAT parts). aka aux 3 and aux 4 as per my manual. Doing this without the need to re-program or re-flash the machine. Will this be a plug n...
Top