• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

hyundai

  1. P

    Hyundai Excavator intermittently shutting off

    My Hyundai Robex 450LC’s engine keeps shutting off while operating. I can’t seem to find a pattern, it happens while under a light load, heavy load, while tracking, and even at an idle. It fires right up immediately after shutting itself down and operates normally until it happens again. This...
  2. P

    Hyundai Robex 450LC-7A Excavator warning lights

    My Hyundai excavator has a check engine light and another warning light on the console that I can’t figure out. I don’t have an owners manual and can’t find anywhere online that tells me what this symbol means. Has anyone run into this service light before?
  3. T

    Hyundai 130LC-3 hydraulic hose point to point

    Recently bought a 130LC-3 that has no hydraulics. Has a K3V63DT pump. Found the pump set plates broken on both ends. Fixed the pump. Previous owner had a SHORT 1/4" line capped off that came off the pilot block to the left of pump that has the travel and safety solenoids on it. I am trying to...
  4. M

    Hyundai Robex 200 NLC-3

    Hello, I'm looking for the operating manual of the crawler excavator Hyundai Robex 200 NLC-3 and the catalogue of its spare parts. I buy a r200 nlc-3. It has a problem in its hydraulic pump. I'm not sur if it's its original one. So i'm looking for documentation to found the right informations...
  5. G

    Hyundai 160 LC-7

    I have an Hyundai 160 LC-7 that has a very weak curl. Everything else seems to be working fine. It will hardly curl through a small stump. I have adjusted relief valve but no difference. What should I be looking at?
  6. K

    Hyundai r130w help

    81E3-4004 - CHANGE OVER VALVE along with 21e3-0023 pressure switch (how to attach the two I have a 1996 Hyundai R130W (NOT a r130w 3) the change over valve was replaced with a used part about a year ago - pn 81e3-4004 and now the pressure switch that goes into this (bottom side) has broke - I...
  7. D

    Hyundai 80CR-9 Wont start - Rack Actuator fault

    Just thought I'd post about a job I did recently that may help someone else with a similar problem in future. Hyundai 80CR-9 with cranks but no start fault. Fault codes - note that not all of these were present all of the time, they were intermittently changing and coming and going. 1210-3...
  8. R

    Hyundai hl730tm-9

    Unit has 700hrs intermittent no lifting power hard steering problem, I do not have gauges to check pump pressure, just wondering if anyone has ram into similar issues thanks!
  9. C

    Hyundai HL940

    I'm in the process of buying a new loader through a tender process......Hyundai has bid pretty cheap on a new hl940, and they have a good warranty on the machine. Does anyone have any experience with one of these loaders that could give me a bit of insight on the quality and reliability of the...
  10. G

    Hyundai R80-7A Crawler Excavator Serive Manual

    I need service manual for Hyundai R80-7A Crawler Excavator. This one is available to purchase online but the price is on the high side and I'm hoping to get it free. I'm especially interested in electrical wiring diagram. Any help will be immensely appreciated.
Top