• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

forklift

  1. E

    hi, I often look for truck & loader repair manuals

    hi, I often look for truck repair manuals, and recently I came across free repair manuals, maybe anyone will need them too manualsfortrucks.com and trucksfreemanuals.com
  2. R

    ISO Forklift - Propane, All terrain ANY SELLERS NEAR CT?

    We are looking for an all-terrain forklift, pneumatic tires to drive over gravel. Low hours and in good working condition. Propane or propane/gas combo. Mast height minimum 12 feet Within 2 hours of Waterbury CT 06708 or delivery available. Please email with pictures, model, year, hours...
  3. M

    Hyster S50FT forklift password lockout

    have a hyster s50ft serial number F187V06356D that has had the wrong password entered and is in lockout requiring a supervisor password. Can anyone be of assistance?
  4. E

    Hyster YE 40 flywheel removal

    Hi everyone. I'm changing a clutch on a (1959?) Hyster YE-40 forklift and need some information. In order to remove the clutch on this unit, you can disassemble the transmission output shaft and remove the clutch without needing to split the engine/transmission. The hangup occurred when trying...
    • Egloo
    • Thread
    • forklift forklift repair hyster hyster ye-40 hyster ye40 ye 40 ye-40
    • Replies: 1
    • Forum: Forklifts/Telehandlers
  5. Tom Sticpewich

    Help! Can anyone identify this forklift??

    It’s a Komatsu as you can see but it has no model number or ID plates , can anyone identify if for me or the engine?
  6. W

    Electric Forklift Chager Selection

    We have a Yale ESC 020 AB electric forklift. We need to purchase a 48 volt battery charger and want to make sure we (A) get one that is appropriate for this lift and will effectively/correctly charge the batteries, and (B) don't spend too much on a charger more "sophisticated" than we need. I...
  7. S

    Champ 350HDL Transmission/ Clutch

    Hey guys, I'm working on a rough terrain Champ forklift and I am having trouble with trying to find out the part I need. s/n:CC8303033 The torque converter / clutch are no longer catching. Absolutely no engagement and the clutch free spins after the motor is shut off. I will get some pics posted...
  8. S

    Lull 644d-34

    Please help!, I recently purchased a lull 644d-34 and the automatic fork leveling does not work at all, I wanted to know if you know what this might be, some possible fixes thank you in advance
  9. Ao7000

    Yale Forklift Pick!

    I'll start by saying that I have loved using this forum for loads of information when I was troubleshooting my project Case 580 Super L. So this month's project I have found something new to occupy my time. I friend of mine had an old Yale Forklift with no mfg information that would tell you...
  10. G

    Hyster/Monotrol Transmission

    I have half a dozen of these (New in the Crate) Can anyone give me a little more information on them? The only information I have is what's on the tag. Stock # 2520.135.8868 Part #H28.11 Date 10.3.89 Contract #09603.85.D.1097 I would attach some pictures but I don't think I can because I'm...
  11. Flat Thunder Channel

    HYSTER 30 FORKLIFT; REPAIR INFO??

    Hello everyone! I recently got in trouble for browsing the local classified sections. It was actually facebook marketplace, but essentially the same difference. I brought home an old Hyster Forklift. The ultimate plan is to make this unit operate safely and reliably for a home storage...
  12. Flat Thunder Channel

    Hyster 30, Vintage Unit Value?

    Does anyone know the value of these units? I am looking at an old Hyster forklift. I think it has a 4 cylinder continental propane engine. I am debating trying to purchase for my home shop. It appears from the pictures to be a smaller unit. Which works perfectly for my small garage. Thanks...
  13. B

    Komatsu FG15C14 Clutch and Fuel Pump

    Hey guys, this is my first post so thanks in advance Model: FG15C14 Serial: 126309A I'm looking at buying this forklift for $500 to use around my house and wanted to know if y'all thought it was worth it. I went today to start it and looks like the fuel pump is out along with the clutch. I...
  14. J

    Losing Voltage to Starter on 2002 LiftKing Forklift

    Drops from 12.5 to 8 volts when turning on ignition. Won't engage the solenoid. New starter and solenoid are already installed. Any ideas to where its pulling voltage towards?
  15. J

    Mustang 519 Telehandler Gearshift Issue

    Lift will crank and shift into reverse but will blow a fuse immediately and shut down when placed in forward motion. lift boom will operate normal, no visible leaks or other problems detected. Could it be a possible wire short or any other ideas?
  16. R

    Komatsu FG50AT2-8 Forklift

    got a FG50AT2-8 S/N 130402A replaced master cylinder and wheel cylinders master was sticking, had one wheel cylinder seized. replacement went well but as putting on drums nicked seal lost gear oil in right drum that got everything messy, replaced seals and cleaned up shoes ground down with flap...
  17. Mateusz

    Lithium Ion batteries

    Hello, I am interested in buying electric forklift with capacity 2500 kg. Some dealers are trying to convince me to Lithium-Ion batteries. I am working with forklift approximately 6 hours per day. Have you tested foklifts with these batteries? I really would like to know your experiences. Thanks!
  18. Gearflow

    Noblelift?

    Anyone here have experience with Noblelift? Saw their facility in IL and was impressed with their 5,500lb FE4P55N Forklift. Their scissor lift was awfully similar to some of the other major brands (JLG in particular), curious to know if these guys manufacture some of the other forklifts too.
  19. R

    Hi All, Rob (Pure Lubrication) Melbourne, Australia (Newbie)

    I am the owner operator of a mobile oil system cleaning business (Pure Lubrication www.oilsystemclean.com.au). I currently clean all types of oil systems including Hydraulic, Gear, diesel, synthetic. I do a lot of excavators, concrete pump trucks, reach stackers, forklifts among other oil...
Top