• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

ctl

  1. S

    317g need help

    Hi all I have a 2019 317g. Everything seems to work great on it. Love the machine. I have used a auger attachment with no problems. So I bought a vibrating roller packer. I hooked it up to test and it vibrates then just slows and stops. I've checked my hydraulic fluids I'm good. I just did a...
  2. Ridinhigh1500

    Bobcat Fuel Injectors $1,500

    I have a set of injectors and common rail out of a Bobcat T595 with a Doosan 2.4 L. Bobcat part # is 7275454. Delphi Part # 28337917 will fit Doosan 2.4 L engines.
  3. K

    Help removing final drive cover on John Deere 333g

    Would like to know how to remove the final drive cover on my john deere 333g. I am replacing the snap rings and seals. I believe I need to apply force on the cover in order to spin and unlock it but I don't want to ruin it. Thanks!
  4. Connor Gardiner

    2020 Cat 299D3XE, Lemon?

    P.S. Machine had already been sent to the dealer which diagnosed it and stated that after being run under (vigorous) testing the machine would not repeat the trouble code and advised machine was fine. I recommended a new DEF Injector be installed into the SCR system. EXTREMELY disappointed with...
  5. C

    Heater issues 299D3

    Hello all, need some help. I have a 2020 CAT 299D3 XE that I use primarily for land management/forestry. During the winter I use it to run a CAT Snow Blower. This winter, the heater has been giving me issues. It will at times blow hot/warm, but it will then blow cold with no warning. In can...
  6. Quki22

    Cat 277c TPS Calibration Issue

    I have been following several of the TPS threads but have not found a resolution to a recalibration issue. I took my 2008 cat 277c JWF01714 to the local cat dealer for the travel speed slowing to a stop. I provided them the service bulletin regarding this known TPS issue and for what ever reason...
  7. A

    CTL Undercarriage Components Life Expectancy

    How long does the following CTL undercarriage components last? (hours or years) Rollers Idlers Sprockets Rubber Tracks What are the best aftermarket undercarriage parts brands?
  8. Poppystate

    Cat 299d xhp event codes + others

    Machine is going into limp mode right at startup with warning alarm. Used to happen every now and then. Would turn off, back on and would clear up for a while. That will let the machine get back to work. Due to the responses on this website on other threads, I think I diagnosed it to the wheel...
    • Poppystate
    • Thread
    • 299d 299d speed sensor 299d2 cat repair caterpillar caterpillar 299d caterpillar repair ctl event code
    • Replies: 54
    • Forum: Skid Steers
  9. KyS650

    CAT 259d3

    I'm looking at making the jump from a wheeled machine to tracks. I've been eyeing the 259d3 pretty hard. Has anyone had any experience with those? Any pros/cons? Any input would be much appreciated.
  10. KyS650

    CAT or Bobcat

    I know this will probably start a war but wanted to hear both sides on the best CTL, CAT or Bobcat? What are the pros and cons of both? I own a wheeled skid steer and am in the market for a track machine. Trying to educate myself as much as possible before spending the $$$. Who else better to...
  11. D

    Cat 259d low voltage

    I keep getting a low voltage message on machine replaced the battery message went away for couple days than came back, tested the battery it was good so replaced the alternator and voltage went back up to around 14.2v for about 2 days now its dropping below 11v with the error message and wont...
  12. C

    John deere 329E wheel speed sensor

    I have a JD 329e compact track loader. Recently it started driving erratically and eventually stopped moving. The trouble code "left wheel speed sensor erratic or incomplete data" came on. I have lifted the cab and checked connections, i pulled the inspection plate on the front side of the wheel...
Top