• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

clutch

  1. P

    Jd 6430 clutch solenoid issue

    Hi all, does anyone have the correct resistance number for the clutch solenoid RE177539. having issues, but want to make sure before I buy a new one. thanks in advance paul
  2. I

    CAT 988B works but won't move

    Hi, I have a American CAT 988B which doesn't move. The engine is working, the bucket is working, the steering is working, hydraulic oil filled, but it won't move. It was moving 3 months ago, but suddenly its not moving anymore. I pushed the lever to drive and reverse by many different ways...
  3. J

    Deere 450C transmission clutch linkage question...

    I have a Deere 450C crawler loader and it has not run in years, so a new battery and it is running fine. Went to move it and the clutch pedal linkage doesn't seem to be doing anything... I have the YUGE JD shop manual and I searched for transmission clutch adjustment and there is a tiny crappy...
  4. R

    Cypress 6280 Slip Clutch

    Hi All Looking for parts for a Cypress 6280 30" Slip Clutch. After coppers, frictions & air diaphragm. Thanks in advance.
  5. Rolf Kraus

    Cat D6 B Clutch Slip

    Folks, Is there an existing post or do you have some guidance on adjusting a slipping clutch on a Cat D6 B? It will no longer push a heavy load or back up hill without slipping, it came on slowly, but we are using it heavily now, so it has become critical. It slips and the clutch lever will...
  6. C

    D4D 82J Brake Band/Steering Clutch Questions

    Hello All, Thank you in advance for your advice! I recently started working on a farm that has a '68 Cat D4D (sn: 82J450) that had been sitting out in the field for quite a while. I fixed the fuel leaks and replaced the ignition system and starter and got her moving again. Man, it feels good...
    • clarkcamp
    • Thread
    • brakes cat clutch d4d steering
    • Replies: 6
    • Forum: Dozers
  7. B

    Komatsu FG15C14 Clutch and Fuel Pump

    Hey guys, this is my first post so thanks in advance Model: FG15C14 Serial: 126309A I'm looking at buying this forklift for $500 to use around my house and wanted to know if y'all thought it was worth it. I went today to start it and looks like the fuel pump is out along with the clutch. I...
  8. M

    1994 JD 650G - no 4th gear

    My dozer is a 1994 JD 650G. It quit working in 4th gear. I rarely use 4th and only noticed it the other day when it didn’t move the dozer. I plan to have the local JD service guys take it in to fix it when I can. Right now I need to work it using the lower gears. My question is this; will I...
    • MrChuckles
    • Thread
    • 4th gear clutch transmission
    • Replies: 9
    • Forum: Dozers
  9. J

    TD25 Dozer Clutch Pressure Problems

    Hello, I’ve recently come into a TD 25 dozer. It runs like a champ, and I’ve run it about 10 hours since I got it, however, as of a little bit ago, I lost most of my clutch pressure. It still runs strong, and if I idle, it keeps pressure in the “blue zone”. The moment I put it in gear, I lose...
    • Joseph Warren
    • Thread
    • clutch dozer pressure pressuredrop td25 transmission
    • Replies: 1
    • Forum: Dozers
  10. Spalinko

    D8H (62A) Clutch release piston, loss of power.

    Hello everyone I have a D8H 62A powershift Caterpillar bulldozer with some issues I couldnt trouble shoot in time for the season but id like to ask for some advice on what may be wrong. The issues are, it will not stay in gear pops out under throttle and under load will not pop into gear...
    • Spalinko
    • Thread
    • 46a clutch clutch piston clutch release piston dh846a loss of power shifting problem steering clutches
    • Replies: 30
    • Forum: Dozers
  11. Stan580D

    Case 580D Shuttle

    I have a schematic for my 580D, but I can't seem to figure out where the clutch solenoid gets it's power. Am I missing or overlooking something? Keep getting a dead end. Anyone that can put me in the right direction?
  12. C

    Gallion 118 b grader

    G’day, so found another Cummins engine for grader I think it had a H6 135 Cummins ( put a con rod through block . So found a Hb1 think about 175 hp ? And I have swapped the sump so pan is at front of old engine and bell housing, all fitted but! Did notice rear main seal and crank a little...
  13. B

    Belarus 825 - needs a new clutch - any idea of rough cost to repair?

    Looks like my 1996 Belarus 825 (81hp, 4wd, D-243 diesel, purchased used in 2011) can't take any more abuse from me, and is holding out for a new clutch; we pulled what looks like clutch material out it. It won't move backward at all, and will go forward a bit (if wind is blowing right) ...
  14. Z

    580b clutch?

    Hey guys I've got a question about an old backhoe. It's an early 70's 580 b dry clutch not the converter. I'm thinking I need a new clutch it moves good in 1'st gear a little slow in 2'nd won't take off in 3'rd or 4'th it will go in the higher gears if you get it moving first like going downhill...
Top