• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case 1845c

  1. W

    Case 1845C Auxiliary Hydraulics

    Hello I have an 1845C with foot control auxiliary hydraulics. One of the outputs work as it should but the other only has a little bit of pressure. Enough to squirt out fluid but not move a cylinder. I removed the foot control valve and it looks like it’s in good shape. Only 3 of the 4...
  2. S

    Parts for Case 1845C

    Looking for suggestions on where to go to buy Case 1845C parts. This evening I was searching for wheel studs and it became apparent to me that I could not find any good resources for a part as simple as this.
  3. B

    Case 1845c purchase?

    Hi, My first time on this site and really find it helpful. I'm looking at an 1845c, brown top with 3700 hours, good tires and overall clean. The seller is firm at $10,800. The only issues I found is one of the chain covers is slightly cracked, and when I lifted the seat I found what looked like...
  4. C

    Case 1845C aftermarket auxiliary

    I purchased an early 90s 1845C that had the Aux removed. There was a cap on the power beyond and a cap on one side of a Tee on the loader control valve... I installed a DO3 spool valve with new auxiliary hoses and I can’t get my grapple to move. There is oil in all lines and each line responds...
  5. T

    Case1845C auxiliary hydraulic

    I have a case 1845c. All my bucket functions are good and strong. But when I use the auxiliary (foot pedal) for attachments, (backhoe, trencher, tree shear) things are a weak. Is there a bypass valve just for the auxiliary located on the auxiliary body? Or main control valve body? Any advice...
  6. J

    Should i rebuild my own 1845c cylinders or have them done?

    Im trying to decide if i should rebuild my own cylinders or have a shop do them. The shop quoted me 220 per cylinder parts and labor. I need to do both lift and both tilt cylinders. Who has rebuilt them?
  7. G

    Case 1845c aux hyd temp

    Hey y'all, just finished work on hooking up a bobcat 709 backhoe attachment to a case 1845c with standard flow auxilary hydraulics. It's taken a while since I haven't had much time, but originally had to replumb the aux hyd since previous owner deleted. Just tried it out and it works well, but...
  8. S

    Case 1845C control arm - reverse issues

    I'm having an issue with my CASE 1845C. The right side control arm does not operate in reverse. It works going forward. The left hand side works fine in both directs. What could be some simple trouble shooting ideas I can look into before spending a lot of money at a repair shop? Some linkage...
    • Sethery0522
    • Thread
    • case case 1845c control arm linkage reverse issue reverse not working skid steer
    • Replies: 2
    • Forum: Skid Steers
Top