• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

bomag

  1. D

    Bomag 2016 BW177D3 Joystick and Fuel Pump Issue

    Since purchase we have had a loose joystick that doesn't automatically return to the neutral position. The engine revs unusually (pulsing) when idling and in operation. We replaced the governer and still had no change. Believe the engine is Cummins B4.5-80C. When the joystick finally gave up...
  2. B

    Bomag BW211D-3

    I'm new here so I'm not sure if this is the right area to post this. We have a BW211D-3 that has very stiff steering and also sometimes won't travel in either direction. It will start forward a couple feet then stop, then it can go in reverse a few feet. I checked the pressure at the steering...
  3. Pep Joe

    Bomag soil stabilizer s/n 101590041070

    Please I need a help on how to test voltage to the injector pump solenoids. I don't think ecm is energizing them but I want to be sure. Three out of the six injectors share a common positive and so for the other three but each with a negative supply. I want to know if I can measure the positive...
  4. F

    Bomag BW120 AD when reversing slowly the brake has been initiating fighting the drive motor

    We recently acquired a Bomag BW120 roller with 1000 hours on the clock. When reversing really slowly we were finding at times the brake was initiating whilst the roller was still in drive. It was quite abrupt and from what i have read can lead to quite extensive hydraulic motor damage. The...
  5. Z

    Bomag 100 AD stops travel after warm

    I have a Bomag 100 AD that will randomly stop traveling after about 10 minutes of solid use. It only has about 1,000 hours on it. The drums continue to vibrate and the parking brake light does not come on.. help??
  6. C

    If you were looking to buy a used remote trench roller,which is the better buy a Wacker or a Bomag?

    I generally rent trench rollers as needed, but I think I want to purchase a used unit. I mainly have experience with Wacker rollers, but I am not brand loyal. I see plenty of used Bomag and Wacker units around. I am looking for input on which one may be better. Thanks
  7. A

    BOMAG BC 571 RB Sanitary Landfill Compactor

    Good Night, I have a question about the BOMAG sanitary Landfill Compactor, model BC 571 RB. For some reason the steering lever of the compactor is only turning left completely, but is not turning in the other direction. What are the possible causes for this issue? Any help appreciated.
  8. J

    Bomag BW172D

    Looking for a rear axle assembly on a Bomag Bw172D... Anyone know where to find one? I've called several scrap yards and can't seem to find one.
Top