• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

1845c

  1. Skidud

    Running a low flow brush cutter on a high flow machine

    The neighbor has a Case 1845c with factory high flow auxiliary kit that puts out 30gpm. The factory auxiliarys run at 16 gpm. My CID Extreme brush cutter is designed for 20 gpm. My question is, if I adapt the hoses/couplers on my cutter to fit the high flow, and keep the throttle at under...
    • Skidud
    • Thread
    • 1845c high flow high flow conversion
    • Replies: 27
    • Forum: Skid Steers
  2. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  3. E

    Case 1845c weak drive motor.

    I have a 95 1845c with originally weak drive motors on one side. The guy I bought it from had a machine that had bad drive motors and he swapped the motors fixing his and now the machine I have is weak. Sold it because it had been in a fire and needed alot hoses and stuff etc. So with that in...
    • Ewayne_R
    • Thread
    • 1845c case drive motor pump side spool tandem valve weak
    • Replies: 4
    • Forum: Skid Steers
  4. C

    Case 1845C Steering issue

    I finally got my 1845C operating. I don't have any history on it because the P/O got it half stripped, radiator and whatever else was worth anything. I'm having a issue with steering, it bucks and jerks when I use the right stick. I removed the seat and blocked it up and used my hands to move...
  5. C

    1845C Chain sprocket

    I picked up a new to me 1845C skid steer with 3001 hours, Previous owner bought it broken down missing a few parts like the radiator from scrappers with no history. Anyway I have it running after years of sitting , I went to move it to see if it needed anything like motors or a pump and the...
  6. M

    Help Identifying Parts on my 1845c

    Hi Guys, I see a few things disconnected and I'd like your help to know what they are and to get familiar with my machine. I've marked my pictures with different colors on what I need help identifying. Thanks!
  7. B

    Case 1845c purchase?

    Hi, My first time on this site and really find it helpful. I'm looking at an 1845c, brown top with 3700 hours, good tires and overall clean. The seller is firm at $10,800. The only issues I found is one of the chain covers is slightly cracked, and when I lifted the seat I found what looked like...
  8. G

    1845c loses drive after shutting off

    1993 1845c Everything functions great upon startup. I can work the machine as normal, as soon as I stop the machine/lift the safety bar up and try restart the machine I lose all power to the drive wheels. Behaves like it's in neutral, no load on the engine. Have full control of boom and tilt...
  9. Z

    1845c Sprocket Shaft Bearit

    I need to replace the needle bearings in the sprocket on the right side sode of the machine, sprocket moves back and forth. I'm guessing I need to loosen the chains pull the shaft and then work the sprocket out one of the access holes. I guessing 5 hours to do it. Thoughts or suggestions? (Asked...
  10. C

    Case 1845c Planetary Gear size

    Hi guys. i recently bought a case 1845C brown cab with the planetary gears for the wheel motors. The right side carrier had lack of oil it looks darker than the other side, and the bearings in the 3 gears of the carrier are shot. Well i happened to pick up a new planetary carrier. The numbers...
  11. Dmoneyallstar

    Case 1845c loader control valve, 108220A1, 1 used, 1 new

    108220A1 loader control valve for 1845c with serial JAF0122751 and newer. I've got 2 valves: 1-qty new-in-box 1-qty used with fittings, pulled from running machine Got these in a package deal and do not need. Make offer. PayPal, Venmo or cash in person. We also have Square-Up if u want to...
  12. C

    Case 1845c won’t stay running

    Evening everyone, Home your all having a good thanksgiving. This is my first post here hopefully someone can help me. I’m working on an 1845c the machine starts right up runs for about 45 seconds then shuts off starts right back up but turns off within a few seconds. Battery connections are...
  13. Skidud

    Case 1840 hydraulic pump upgrade.

    Does anyone know if I can swap my 1840's hydraulic pump for a 40XT or even a 60XT or 75XT hydraulic pump? They all have a 7/8" 13 spline shaft. The 1840 puts out 15 gpm, the 40XT flows 19 gpm, and the 60/75XT pumps out 21 gpm. The biggest concern I have is the increase in relief pressure from...
    • Skidud
    • Thread
    • 1838 1840 1845 1845c hydraulic pump
    • Replies: 3
    • Forum: Skid Steers
Top