• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

1840

  1. S

    97’ Case 1840 drive chains

    I’ve been working on our 97’ case 1840 skid steer - it has 3200hrs but has had very poor maintenance from previous mechanics. My initial problem was a very very bad hydraulic leak that resulted in removing the tandem hydraulic pump and all hydraulic hoses - the hoses were in very rough shape so...
    • sherwood22
    • Thread
    • 1840 1840 case skidsteer chain case cover chain deflection
    • Replies: 2
    • Forum: Skid Steers
  2. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  3. O

    Case 1840 right side half speed in forward only.

    This is my first post so let me know if this is in the wrong place. I just picked up a case 1840 with around 1400 hours. Everything seems to work how it should other than the right side moves significantly slower than the left in forwards only. In reverse everything seems to work how it should...
    • OMH
    • Thread
    • 1840 case case 1840 hydraulics m91
    • Replies: 2
    • Forum: Skid Steers
  4. C

    Case 1840 Skid Steer not starting

    Good afternoon to all, I have an Case 1840 Skid Steer ID# JAF0221866* that has been giving me issues starting then staying running. The first time it happened the engine revved high, low, high, low, died and would not restart. Before this happened it had been running without any issues or...
  5. Skidud

    Case 1840 lift cylinder issue

    When trying to back blade using down pressure, my 1840 (4000 hrs) lift cylinders will occasionally "bounce", as in retract and then spring back. It also acts up when I tilt forward and apply down pressure with the tilt cylinders as well. If I don't apply down pressure with the lift cylinders...
    • Skidud
    • Thread
    • 1840 cylinders hydraulics valve
    • Replies: 0
    • Forum: Skid Steers
  6. Skidud

    Case 1840 hydraulic pump upgrade.

    Does anyone know if I can swap my 1840's hydraulic pump for a 40XT or even a 60XT or 75XT hydraulic pump? They all have a 7/8" 13 spline shaft. The 1840 puts out 15 gpm, the 40XT flows 19 gpm, and the 60/75XT pumps out 21 gpm. The biggest concern I have is the increase in relief pressure from...
    • Skidud
    • Thread
    • 1838 1840 1845 1845c hydraulic pump
    • Replies: 3
    • Forum: Skid Steers
Top