• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. F

    Wabco 111A trouble

    Thanks....Frank
  2. F

    Help need some part numbers

    I'm working on a WABCO 111A front right axle. I need the part # for the Timken inner bearing and race. I salveged one bearing and the race but my supplier thinks there may be two different bearings and wants to be sure before he orders. The #'s I have are Bearing 29675, Race 29622D. He also...
  3. F

    Wabco 111A trouble

    Thanks for the advice Dickerson Bros., I'll give it a try. You know your WABCO'S, when I get the axle out I know I'm going to need bearings and races and seals, do you know the part #'s? I'm located in central Wisconsin, my son is a trucker and gets all over, maybe if we need some parts or tools...
  4. F

    Wabco 111A trouble

    Dickerson Bros, thanks Ill try that. I looked at that possibility a couple of times and thought it might be the way. How far do you jack up the cockpit? Is there enough play in the wiring, hoses, etc.....Frank
  5. F

    my new job

    Daugherty102, nice work. Be carefull digging that close to the edge of the water. I had an experience once when I was making a pond bigger that had abought a foot and a half of clay over sand. As I was digging the water swirling at the edge undercut the sand and I didn't realize it until my...
  6. F

    Wabco - c pull

    Hey 25c, I like your c-pull it looks twice the size of my 111A. I'm still wrenching on mine. I have been doing other things the last couple of days, plowing, discing, etc. This weekend I should get back to the scraper. I'll let you know how it goes. Your pics make me want to run it:).....Frank
  7. F

    Wabco 111A trouble

    scrapperboy222, thanks for the encourgement,:) I can use it. I'm doing this job mostly by myself and it is not easy. My son is coming over today so I can help him replace a leaf spring on one of his semi trailers. I'll get him to help me pull the axle. Does any one have a parts book for the...
  8. F

    Wabco 111A trouble

    Send some pics.....Frank
  9. F

    Wabco 111A trouble

    DAEXCO, do you want to sell the machine or are you going to part it out? I like Case to, have an 1150E LGP LT with full cab. When I sized down I kept it and sold my D8H and straight 1150. I have a CAT 930 wheel loader that I like alot. and a 3208 CAT in a dump truck that I can always count...
  10. F

    Wabco 111A trouble

    :(Good morning 25c. Yesturday was a bummer, I fabricated a wrench for the axle nut. but it failed to work. Today its back to the bench to try again but hey you learn from your mistakes. Its a good thing I'm not busy right now. I'm planning to move dirt in a couple of more weeks. All of my other...
  11. F

    Wabco 111A trouble

    25c Good afternoon, well I have the axle cap off. It took all morning, I reached them from underneath and on top. Three I could not see, had to do it by feel. I left the trans pan on I don't think it would have help to take it off. The ones on the bottom I could see from under the machine, the...
  12. F

    Wabco 111A trouble

    25c thanks for the pics. I have the tractor all blocked up and the bottom pan off. I wish it were the left side, it looks like a clean shot to that axle cover. The right one no luck, the trans. seems to be somewhat off center and real tight to that cover. Question for you. Can I get better...
  13. F

    Wabco 111A trouble

    25c ther is an axle cover plate on the inside. It looks like I would have to get to it from the bottom by taking off the skid plate. Does that sound right to you? If so I'll have to block it up pretty good.....Frank
  14. F

    Wabco 111A trouble

    25c thanks I'm headed out to the shop now. I'll check for the axle cover before pulling the tank. I'll let you know what I find.....Frank
  15. F

    Wabco 111A trouble

    25c, thanks for the help! I had thought about taking off the fuel tank to see if I could get to the end of the axle from there, but decided to ask for help before making more work by doing something not needed. Your pictures will definatly be a big help. I'll be out there tommorow and give it a...
  16. F

    Wabco 111A trouble

    I know it has to come out, but I just am getting a headache trying to figure it out:Banghead but thank you again for getting back on it. I hope some of our Wabco people can give me the procedure to get the axle out.....Frank:)
  17. F

    Wabco 111A trouble

    Thanks for getting back,here are some pics of the mess, if you need more let me know.....Frank
  18. F

    Wabco 111A trouble

    Can someone please give some advice? My Wabco 111A lost a bearing and seal on the right axle. It seems like the only accses is throuth the plate on the back, but there is no room and I can not figure out how to get the big round gear off the axle and get the axle out to replace the bearings and...
  19. F

    under carriage

    Great to get the undercarriage done in 5 hrs.:notworthy Tricks of the trade, as "Bruno" would say. I usually do the job by myself. I took a car brake shoe and welded it upside down to a car jack the type that scissors up. I put a piece of sheet metal on the ground under the track frame to slide...
  20. F

    some wabco pics

    Scraperboy222, did you work on your dads 111A's very much? I'm having trouble with mine,:Banghead maybe you could help. Hope so.......Frank in Wisconsin:usa
Top