• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. L

    S 40 crank no start

    That is exactly what my thinking is to, How is it even possible to be running with no power to solenoid from #9 on IGSM , but that also explains why no functions would work in BP or GP because of no power to IGN circuit. The only way the solenoid can be getting power is where the "FIX" wire is...
  2. L

    S 40 crank no start

    Remember I said someone had "FIX" it before by running 2 wires from Fuel Solenoid to TB23 and Controlbox Grd. This is only "extra" wiring I have found on machine.
  3. L

    S 40 crank no start

    Yeah, That is what I thought too, so I check for voltage at fuel solenoid and had 13v at solenoid ,so i took wire off alternator to make sure it wasn't back feeding and rechecked IGSM for voltage at any terminals, only 12.5v Bat on #6 which has no lite for it.
  4. L

    S 40 crank no start

    Let's start over here. I have a Genie S 40 #S4007-12341 with Duetz F3L2011. It starts and runs great, you can shut off and start from basket for about 1/2hr operation, then after shut off it will crank from basket but not start. Have to switch to ground position to start then flip back to...
  5. L

    S 40 crank no start

    Genie S40 crank no start from basket
  6. L

    IHI 35N Overheating

    Yes, definitely over heating of the hydraulic oil going thru the cooler will transfer the heat from Hydra cooler to the radiator. Any hydraulic system will generate heat when the oil is forced thru a retriction, whether it is into a cylinder under pressure to move the cylinder or thru a relief...
  7. L

    IHI 35N Overheating

    Hi Kirk, If you loosen the fan belt and maybe even remove from the pulley on crankshaft. Then get you a really bright Led flashlite and a mirror so you can get the mirror down next to the front of pulley at about a 45 angle, then shine your flashlite into the mirror, you will see a line around...
  8. L

    CASE 850 - Transmission Control Valve/Braking/Steering issues

    I totally agree with you Frankieavalanche, if they were not suppose to have brakes they wouldn't have come out with them on the machine. But sometimes the OEM stuff just doesn't work or last as long as they should. I know this is several years since you inquired on this brake stuff, but I just...
  9. L

    IHI 35N Overheating

    Sorry Kenskip1, I ass u me d you did the work shown in the video, I really appreciated the video, without that insightful info that was revealed i n the video a lot of people would still be chasing over heating problems. You were correct in trying to help out by sharing this vtdeo. Thank You...
  10. L

    IHI 35N Overheating

    Hi Kirk, I've been working on a similar problem that you listed. That is how I found you and your problem. I watched the video from Kinskip1 and saw that he had the same Isuzu 3LB1 motor that is in my IHI 28N. So I went and looked at my pulley again and it looks like a one piece pulley, but when...
Top