• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. B

    Wa250-L3

    E03 code. Won’t move forward or Reverse but dash does indicate when lever is in F or R. Is there any way to pull codes without any software or does a dealer have to come out?
  2. B

    s205 aux valve controls

    2010 s205 high flow. foot control machine and using a 12 pin plug on the aux hydraulics. Running a Erskine snowblower. The blower works fine when you hit the trigger. Everything there works as it should. Looking at both joysticks, the 2 inner buttons on each side that move up and down with your...
  3. B

    wa320 3rd function for plow

    Want to install a diverter valve in a 1995 komatsu wa320 for a snowplow. We have diverter valves tied into the curl lever in a couple other loaders with a push pull cable that work well. I came across electric diverter valves that look pretty simple and smaller. Most I'm finding are rated for...
  4. B

    1986 komatsu wa350 trans

    had an issue last year with machine not moving. Found broken power wire going into solenoid bank for trans. machine worked fine for a couple storms. Now all of a sudden it moves here and there. meaning goes into gear when you release parking brake. and sometimes it won't. Also when plowing...
  5. B

    1998 international 4700 brake issue

    1998 international 4700 with juice brakes. new master cylinder. New front calipers. New front rubber brake hoses problem is when driving the brakes will slowly apply themselves without touching the brake pedal and eventually stop the truck. Only way to move the truck again is to release the...
  6. B

    98 international 4700 brake booster

    1998 international 4700 dt466. Having issues with the brake booster. Brake pressure light is on. With key off, press pedal and nothing at all. Hard pedal and backup motor does not come on. Turn key to on position and backup motor comes on. Start engine and motor does not shut off at all...
  7. B

    L90C third valve

    Have a L90c with no 3rd function. There is a 3rd valve already set up but there are no lines or pilot valve in the cab. I read a post about a similar situation in here for a L180D. My local dealer said there is no kit. For kicks I gave him the part number posted for the 180D. He told me its a...
  8. B

    1986 wa350 won't move

    Plowing this morning. Driving up the street and all of a sudden the loader revved up and stopped moving. Clutch cutout switch didn't do anything. Cut the wires and still nothing. Parking brake not applied. Oil level in trans is good. Filter has less than 100 hrs. You can feel it go into forward...
  9. B

    580sk muffler

    Working on a friend's 580 super K. I'm trying to find the correct muffler for it. It's a non turbo with a tilt hood. I keep finding 2 different part numbers and different web sites are not being specific between turbo and non and only show one or the other. Here are the part numbers...
  10. B

    1986 Komatsu WA350

    Plowing a couple weeks ago and all of a sudden the engine shut down. Still had lights and heat going in the cab with the key forward. Went to crank engine and it cranked but wouldn't fire. Got out and saw that the actuator for the fuel rail was in the closed position. got a strap and tied it...
  11. B

    Cat 3208 question

    Looking at a 1985 L8000 with a 3208. Truck was an old fire truck and it only has 7900 original miles. Now I've read about these engines not being sleeved, short life expectancy before rebuild, white smoke on cold starts, etc We would be interested in this truck as a sander. It would see at...
  12. B

    what fluids for 98 L120C Volvo

    Can anyone tell me what fluids are used in a L120C? hydraulic, axles, transmission.
  13. B

    Asphalt

    I have a 6 wheeler with a J&J aluminum body. Any issues if I haul a load of asphalt? Warping or anything like that? Only hauling 1 load. About 6 ton. And no I do not have a plastic liner on the floor thanks
  14. B

    WA350 no second gear

    1986 WA 350 no second gear. Last year had no first gear. Replaced the solenoid (far right) and worked fine. Not too familiar with these so I'll try to explain what I found. With a test light on the same solenoid I replaced last year (far right) I grounded the test light on the frame and...
  15. B

    KW T300 engine brake

    Have a 2005 KW T300 with an ISC Cummins. Drove it home 4 hrs from NY. Engine brake worked when it wanted to. Now it does not work at all but the light on the dash still comes on when you flip the switch. Never had to work on an engine brake before. Need to know what I should look for and...
  16. B

    KW T300 parts

    Besides a dealer, does anyone know where i can find interior parts for a 2005 T300? Looking for the wood grain for the dash board. Mine is faded and has the clear overlay all peeled up and would like to replace it. I found lots of kits for 06-up but one for 05 any suggestions?
  17. B

    Kenworth T300

    After years of driving a 1990 International 4900 single axle dump with a 185hp DT466 and 5+2 with 308k miles, we finally put a down payment on a newer truck. Looked everywhere and for the money, pics, and info I recieved it was worth the trip to look at Drove 4 hrs to NY this morning to look at...
  18. B

    334 Bobcat tie downs

    After reading so many different opinions about chaining down equipment, I decided to play it as safe as I can and use 4 chains and binders for our 334 (and another for the boom) and skid steers. Now on the 334 there is only one hook under the back of the machine. What i used to do was loop...
  19. B

    WA 180 brakes sticking

    I posted this fall about brakes on our 94 WA 180 https://www.heavyequipmentforums.com/showthread.php?19740-94-WA-180-brakes The brake res is still emptying itself in one of the diff housings. No external leaks anywhere. Yesterday when plowing, the operator told me he was losing power in...
  20. B

    Dresser trans. What are these parts?

    Same machine that is split for center pins in another thread. 1988 Dresser 520B 3 spd trans. Cannot find a tag on the trans. Was rebuilt around 5k hrs by previous owner just before we purchased. Now has 7400 hrs I drained the trans oil and then removed the strainer. Found bronze metal...
Top