• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Cat F series pavers

    That’s for the remote pendant. Our paver has that there already. I’m talking about the main screed control panel. The panel that has all the controls for auger/conveyor functions and the screen for grade controls/screed heat/diagnostics etc.
  2. P

    Weiler screed on a cat paver

    Does anyone have a Weiler SE10F screed on a AP1000F or AP1055F paver? Curious how you like it verses a Carlson EZ4 screed. All our Cat pavers currently have cat rear mount screeds, but certain jobs would benefit from a front mount, so considering trying one in the future. Thank you.
  3. P

    Cat F series pavers

    I would like to know what parts are needed to move the screed operator console to the end gate. I have seen pictures of the console out on the end gate and I think it would help our guys out, because now they have to reach over the ski to make a grade control change. This would be on a AP1055F...
  4. P

    Cat AP1055D

    Any fault codes?I would start with a piston pump neutral test. Then a pump synchronization test. Then a calibration of the pump EDC. How many hours on the paver? Serial number?
  5. P

    980M

    980M (krs01263). I have active event codes E1364(2) and E1389(1). When I troubleshoot the E1364 code step by step I get to the NOX functionality test and it fails because the ARD fails to ignite. Also I should add this machine does not have the DEF quality sensor installed. So I am...
  6. P

    AP1055f code

    Thanks Nige. I don’t think I’m going to worry about this one
  7. P

    AP1055f code

    AP1055F(TJ500227). Has active code 1250-9(1). Looks like a communication code for the product link. Need some help troubleshooting this, I can’t seem to find the troubleshooting procedure on this one
  8. P

    Volvo P7110B

    I will be replacing a propel lever and I need to calibrate the new lever. Can someone post the procedure please? I also would like to calibrate the propel EDC as it does not track straight. Thanks for the help. Serial #385240
  9. P

    Bolt on extensions

    Screed serial number JJ300941 10” extension 486-4622 2.5’ extension 486-4620
  10. P

    Bolt on extensions

    I’m sorry Nige. Paver serial number is TJ501156. Tomorrow morning when I get to work I’ll get serial number of the screed and the part numbers of the bolt on extensions we received.
  11. P

    Bolt on extensions

    We just bought a 10” and 2.5’ bolt-on extension for our AP1055F paver with a SE60V screed. It didn’t come with instructions. Is this pretty straight forward install. I’m only familiar with the D and E model paver bolt on extensions. This looks like a totally different design. thanks
  12. P

    Volvo P7110B

    Need to remove the drag chain to replace the floor. As far as a know there is no problem with the hyd adjustment.
  13. P

    Volvo P7110B

    We just got this paver used and I don’t have any service manuals yet. How do you relieve the hyd presssure for the conveyor drag chain tension. I see it’s hyd tension as soon as you start the engine. Thanks.
  14. P

    Cat Ap1055E

    It has to be leaking from the input seal on the gearbox. Everything is dry on the other side where the pumps bolt to the gearbox. The flywheel housing is supposed to be a dry housing. There is a hole on the bottom of the housing and there is evidence of gear oil there. Every time I service...
  15. P

    Cat conveyor chain tool

    I think I will do like sled dog suggests. I will open up the diameter of the side bar holes so they are a slip fit, and that will be my master link. Thanks to everyone for the help.
  16. P

    Cat conveyor chain tool

    The Cat chain does not have a master link. I don’t think Cat even offers one. All the links are the same. Last winter I installed a new chain in a AP1000D (prefix EAD)and I had to use the ball joint c-press to install the side bar. We just bought a new AP1055F (prefix TJ5). Next winter we...
  17. P

    Cat conveyor chain tool

    Thanks for the replies. The chain link is what heymccall has posted (359-1007)the side bar (#13) is a press fit onto the master link(#14). We use a ball joint c-press to install but getting them off is the issue. Like I said before, we made a tool but it doesn’t work very good and actually...
  18. P

    Cat conveyor chain tool

    Does anyone make a tool to break the conveyor drag chains on Cat pavers? We made our own tool, but it doesn’t work very good. Just curious what other paver mechanics do. We have 6 Cat pavers and we remove the chains every winter to do maintenance and then flip them side to side. So if there...
  19. P

    Cat Ap1055E

    Thanks for the reply. We don’t have this machine in the shop yet. Also waiting to see what the boss wants to do. Pull the engine and repair the pump gearbox leak or just keep adding and monitoring. I also see that the pump gearbox has a breather that is spring loaded. Is this to keep some...
  20. P

    Cat Ap1055E

    First time posting here. I have a Cat AP1055E paver(TJF00242)that is leaking oil from the pump gearbox into the flywheel housing. The pump gearbox takes 85w-140 gear oil and I’m having to add oil multiple times throughout the season. I would like to get it fixed this winter. Is it better to...
Top