• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    2014 S630 Bobcat loader arms and tilt wont unlock

    I unplugged the door entirely and got no change. in the past ive run the machine without a door (summer and no AC) and had no issues just unplugging and removing it machine operated fine with no codes or warnings
  2. O

    2014 S630 Bobcat loader arms and tilt wont unlock

    So fixing the pinched wires did nothing to fix the issue not really sure where to go from here. If i pull back ever so slightly on the joystick i can get the loader arm lock to disengage, if i pull back fully on the stick to raise the boom it immediately locks if i do it slow the boom will raise...
  3. O

    2014 S630 Bobcat loader arms and tilt wont unlock

    So small update, realized this afternoon that if i ever so slightly pull rearward on the right joystick i can get the machine to unlock and get slow boom and tilt movement for a few seconds before it locks up again. So i pulled the joystick and found this. Looks like its been that way for years...
  4. O

    2014 S630 Bobcat loader arms and tilt wont unlock

    No can't say that i have
  5. O

    2014 S630 Bobcat loader arms and tilt wont unlock

    Ok guys have an odd one or at least odd to me. 2014 s630. Machine has always ran and operated perfectly fine but tonight i got 10 tons of salt delivered and when i went to fire the machine up the loader arm lock wont disengage. If i repeatedly hit the operate button i can get the boom and titlt...
  6. O

    Electrical diagram for dynapac CC10

    Snagged a CC10 today for $1k from a guy that bought it to do his driveway. 6k hours but everything is functional and overall it seems to be in pretty good shape. Anyway, the electrical switches for the water and the vibrator seem to be the only things that are currently not functioning. If the...
  7. O

    CAT 304D CR window seal replacement

    Was actually talking about the sliding side windows. The front glass actually stays in place very nicely.
  8. O

    CAT 304D CR window seal replacement

    Have a 2012 304d cr and the window rattling when tracking has gotten to a point where its almost unbearable and honestly im at times concerned about blowing out or cracking the glass. Not sure if anyone here has had good luck with an aftermarket seal of some sort or if hust calling the dealer is...
  9. O

    WTB Cat 304 buckets/attachments

    Recently picked up a 2012 304d cr for pretty cheap as a secondary/backup machine and am looking for some buckets. 12" trenching, 36" or 42-48" grading/cleanup bucket, an auger for posts/sonnet tubes and a ripper. Im in central CT and figured I'd throw it out here before i bought new stuff. Tia
  10. O

    95 Mack RD688s power steering issues

    I appreciate it, I've looked all over the damn thing and couldn't seem to find a tag, im thinking its on the side against the engine so im gunna do a few more checks/tests before condemning and pulling it out.
  11. O

    95 Mack RD688s power steering issues

    Here's a photo of the gauge in question (directly under the pyro meter) and some of the pump thats currently in the truck.
  12. O

    95 Mack RD688s power steering issues

    Recently got a new to me triaxle that was to cheap to not buy but its now time for it to either start making money or move on. Anyway trucks a 95 rd688s e6 350 with an 8ll trans. The main issue with the truck other than most of the gauges not working is the power steering is basically non...
  13. O

    Cat 304 wont swing or walk

    Ok guys this should hopefully be the final update on this issue/problem. After getting the swapped hose issue sorted out i had my buddy from volvo come down to do some pressure testing. We confirmed that the small gear pump off the main pump is infact directly tied to the slew, swing/offset...
  14. O

    Cat 304 wont swing or walk

    So to update everyone I've finally made some good progress on the machine. The short answer to my issues was 2 hoses off the travel block that were swapped. Everything now functions but what i thought was the pilot pump is looking like a swing pump that also is the supply for the main swing...
  15. O

    Cat 304 wont swing or walk

    Been super busy with work the past few weeks so i haven't had a chance to get much done on the machine until today. I had my buddy from volvo come take a look at it we got most of the electrical gremlins sorted out. Now everything electrical works with the exception of the water/temp guage. He...
  16. O

    Cat 304 wont swing or walk

    You'll have to forgive my ignorance as im not extremely familiar with the workings or terminology of these machines and their hydro units. Which gear pump are you referring to? Like one of the drive motors for the tracks?
  17. O

    Cat 304 wont swing or walk

    I kinda half thought the same thing. When i picked the machine up it only had about a gallon of fluid in the tank due to the leaks and the guy i bought it from gave me 4 5 gallon pales of that cheap tractor supply Traveller iso46 fluid just to get the boom high enough so i could get it winched...
  18. O

    Cat 304 wont swing or walk

    NAD01193. Very strange update but i changed the oil today over lunch and figured id run some good fuel through it after the tank cleaning and my swing miraculously came back. Its super slow and nowhere near where it should be but it does now swing. Still no swing boom and no travel functions but...
  19. O

    Cat 304 wont swing or walk

    Absolutely if you have one available
  20. O

    Cat 304 wont swing or walk

    Interesting update, i had some time at lunch today. So i drained and flushed the fuel tank hooked everything back up and did get it started however it took more cranking than i would think is normal. Then i had absolutely no boom, stick or bucket functions at all which didn't make sense to me as...
Top