• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    Where do you get your Case backhoe parts???

    I do business with Joseph. they are a very good company
  2. D

    Where do you get your Case backhoe parts???

    what parts do you need. cylinder packing are easy most of the parts are off the shelf
  3. D

    Worst backhoes

    i Like the case 580's C or newer when buying one. Stay away from the rotery swing motors on the back hoes. stay away from the early gear style shuttles., like Ford and IH had. The coller that slides between forward and reverse gears. is a hard one to find. The WG ( not borg werrner} clutch style...
  4. D

    Can I plow snow w this 2wd backhoe?

    my 580SE pushes snow just fine. might weld a hook up in the back of the bucket, like i did on my allis 816. I would mount a 7 ft truck plow ijn the back of the bucket to push snow
  5. D

    580 E declutching soilniod part number an source

    put the thing back on and it worked thanks for the input
  6. D

    580 E declutching soilniod part number an source

    how do i make sure it is bad . have power going to it
  7. D

    580 E declutching soilniod part number an source

    they dont give that one away
  8. D

    580 E declutching soilniod part number an source

    thanks part looks differant then the one I have. is there 2 differant designes https://wdpart.com/products/d1347-actuator-solenoid-for-case-480d-586e-480e-580e-580se-586d-585d-584d-584e-480ll-580k-585e?variant=40412338552986
  9. D

    580 E declutching soilniod part number an source

    Pulled the declutching soilnoid on my 1988 580E seems not to work. The tag on it reads Trombtta Corp SOL P515-A11 Im looking for a good source and a case part number
  10. D

    580E Declutching solenoid removal

    is there a good ay to lock shift linckage
  11. D

    Case 580 E front engine mount

    that is what I though was going to pull the pump thanks
  12. D

    Case 580 E front engine mount

    what is the best way to remove the front engine mount on a Case 580E. can't jack the engine up high enough to put in new mount
  13. D

    580E Declutching solenoid removal

    Have power to the declutching solenoid, but it don't disengage. How do I remove it
  14. D

    Any hope of getting this pin out?

    i would drill for a 3/8 bolt in the center of the pin and make a puller for it a piece of pipe and washer would work great
  15. D

    580B shuttle problems please help

    ok piston seal on the reverse piston. not compresing on clutches
  16. D

    580B shuttle problems please help

    bad actuator seal. Not compresing the clutches when hot
  17. D

    case 580E backhoe jurky

    run at about 1500 rpm it is this way at idal also. What is a good rpm. the hoe is jsut as stron at idal or 1500rpm
  18. D

    case 580E backhoe jurky

    Is there a way to slow donn the rate the back hoe reacts. Up on controls are fine. Whe i go to dig the back hoe is hard to do fine work with on the down cycle
  19. D

    Case 580 SE fuel sender, rebuild or replace

    Erickson truck in Minnasoda Has a 580E they are parting out. they might have one
  20. D

    1988 case 580SE brake disk source

    is there anything elses in the system that will cause a hard brake peddle on both brakes
Top