• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Takeuchi tl140 glow plugs test?

    Hey skata, I’m having issues with my tl140 starting really hard in the cold weather right now. I believe at least one of the glow plugs isn’t working properly. Was wondering if you could let me know where they are for testing. Are they under the valve cover or out in the open. I couldn’t tell...
  2. C

    Float switch?

    Ok I appreciate that. Thank you. That explains why it doesn’t seem to change speed when I hit the speed switch even though it’s lighting up. I’ll attempt trace the hydraulics hoses next time I get into it. I have a job this weekend with it so I’ll just have to do without it for now. thank you...
  3. C

    Float switch?

    I do have the manuals. I also seen that area but I’m not quite understanding what it’s saying. Plus it still does not help me identify which solenoid is actually for the float. I have a picture of what’s disconnected now maybe someone could help me figure it where it is suppose to be connected...
  4. C

    No aux hydrophilic controls

    so I guess my pictures aren't working. going to try again. i believe this plug goes to the fuel sending unit. its on the right side when sitting in the seat. the other 3 pictures are on the left side
  5. C

    Float switch?

    that is right where the solenoid is located that I am looking at that is unplugged. Issue I am having is I cant figure out where the original plug is there is a wire cut that look similar but it does not seem to have power and if I energize the solenoid with a jumper wire it does nothing. (maybe...
  6. C

    No aux hydrophilic controls

    so I got the aux hydraulics figured out it is the relay switch. also light were just disconnected and I got a feeling the rest of my issues are the same. I have some pictures of wires and connectors that are disconnected but I cant find anything they connect into. one I am pretty sure goes to my...
  7. C

    Float switch?

    hi i know this thread is really old but I am having a issues with my float not working on my tl140. I have been going through the unit and have found what I believe is the float valve and the positive wire is disconnected. I can not find any wire in the area to connect to it and was wondering if...
  8. C

    No aux hydrophilic controls

    no foot pedals in my tl140. I also was noticing that in most forms however in one of the forms i was reading someone had mentioned if you do have the bypass already connect that the aux hydraulics still would not work. since them wires weren't connected I was wondering if they were the safety...
  9. C

    No aux hydrophilic controls

    Hi every one I'm a new skid steer owner and i got a 2006 tl140. I got a grappling bucket for it and I found out the aux controls don't work. also if it maters the float control and the travel speed switch don't work. i have checked the safety switch doesn't seem to mater if the bar is up or down...
  10. C

    Takeuchi TL130-Problems-Wont Move

    If possible could someone email me a manual for a TL140. Just picked one up seems to be having a lot of electrical issues. Runs great but gauges don’t work float button isn’t working aux switch is intermittent and battery light is always blinking. So I got a lot to go through. Also any advice on...
Top