• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    943 Hydrostat filler tube

    For those that want to know you have to remove the cooler line from the hydrostat and the filler tube will come out from the top with the cab up.
  2. M

    943 Hydrostat filler tube

    03Y01541 Serial I have hole rubbed through and was going to get brazed up. has anyone ever removed a filler tube and wormed it out? Looks like a bear from underneath. Top doesn’t look much better. thanks!
  3. M

    943 Hydrostat problem?

    I forgot to update. We were able to get ahold of an expert. He put gauges on the charge ports and after adjusting something inside the hydrostat cover on each side the machine operates normally. The machine made an awful noise (hydraulic) of some sort. As he listened and adjusted the noise went...
  4. M

    943 Hydrostat problem?

    Yes I’m learning these transmissions are really a marvel how they work. Unfortunately the old hands around my area that are familiar with these machines are getting few and far between.
  5. M

    Asv RT-75

    I have an RC50. Easy to work on. Had a boogie wheel fall off today. It happens. Undercarriage is great just watch the rocks.
  6. M

    943 Hydrostat problem?

    The hole looks to be aligned. That was most definitely the spring I found. Thank you! Atleast now when I go to order one I can tell them where it goes.
  7. M

    943 Hydrostat problem?

    I found a broken spring when we tilted the cab and removed linkages for steering pedals from trans. This spring was on the right side of the machine somewhat behind the linkages for steering. Probably 2 inches long and 1 inch in diameter. The center pedal seems to move freely but will not stop...
  8. M

    943 Hydrostat problem?

    Pedals and linkages are now correct. Filter/fluid changed. Loader still just creeps forward In F or R.
  9. M

    943 Hydrostat problem?

    Thank you gentlemen. I was a little worried. CAT informed me today that the pedals I ordered were just that “the pedals”. So into a bucket of tranny fluid the assemblies went and I ordered bearings hopefully they come apart. Will update when I get a little farther on repair.
  10. M

    943 Hydrostat problem?

    Serial number 03Y01541 I believe
  11. M

    943 Hydrostat problem?

    I also should add hystat is full of 10wt.
  12. M

    943 Hydrostat problem?

    Just bought a 943 and the machine will only move slowly forward in F and R no matter the throttle position. Linkages seem correct. Just ordered new track pedals(frozen up). The only thing I see missing is a linkage from the throttle to hystat. Haven’t changed filter yet but machine Was operating...
  13. M

    Test Thread

    Test reply
Top