• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Pep Joe

    Vogele Super 1800-1 augers and conveyors working intermittently

    When I push the conveyors or the augers push button switches down from the operator desk on manual mode, the augers or the conveyors work but intermittently. Their movement don't continues, they're moving and stopping like something is ceasing. Please any idea on fixing this?
  2. Pep Joe

    Bobcat S175 traction solenoid electrical circuit

    I am having a traction problem with a client S175 Bobcat. All fuses are having current, but no pulling and holding current to the traction solenoid. It can not move forward or reverse. I do not have the electrical schematic drawing to trace where the wires are coming from. Please help...
    • Pep Joe
    • Thread
    • #bobcat #trackloader #skidsteer #heavyequipment
    • Replies: 2
    • Forum: Skid Steers
  3. Pep Joe

    I need help with S175 Bobcat skidsteer electrical schematic. I have a traction problem.

    My client Bobcat S175 traction solenoid won't pull and hold even after pressing the "press to operate button" on the left hand panel and the cross bar is down. Usually when the "press to operate switch" is pressed when the cross bar is down, you will hear a sound that the traction solenoid has...
    • Pep Joe
    • Thread
    • #bobcat #trackloader #skidsteer #heavyequipment
    • Replies: 1
    • Forum: Skid Steers
  4. Pep Joe

    What is the common nickname for Caterpillar brand equipment ?

    What's the answer?
  5. Pep Joe

    Secondary steering system on Caterpillar construction machines

    I need your opinion on the negative effect of driving a Caterpillar machine without its secondary steering system working. Some Cat machines have secondary steering motor and pump equipped. Thanks.
  6. Pep Joe

    AEC not working on 330C DKY02164

    The AEC switch button when pressed only reduce the engine speed to 1300 rpm when it is on mode 2 when it's left idle and dial switch is in position 5 up. It does lower the speed by 100rpm when on mode 1 but won't raise the rpm back to what it was when the levers are operated. please I need...
  7. Pep Joe

    My big 14M steering system problem

    I will be happiest if I get a client 14M motor grader steering working again. Will be in big mess if it don't work because I told them the problem is the primary steering control valve module. They Believed me and spent big money to get a new one and after installing it same problem. Below is...
  8. Pep Joe

    Cranking no smoking and no starting 3176C engine for 966G wheel loader

    Engine model: 3176C Engine sn: 3PD13089 Machine model: 966G Machine sn: AXJ02657 This is what happened and what I have done so far: 1. Engine was overhauled. 2. Fixed injectors not new 3. Ecm from another 3176B engine for motor grader. (Ecm part number is 3482379) I flashed it with this...
  9. Pep Joe

    Cat 320B hammer operation

    Having issues to use a 320B excavator with a hammer. It has never been used with a hammer before, we need to use it now but it's not working. we pressed the pushed switch on the top of the right hand joystick and nothing works. Please we need your help on how to get the hammer working. Machine...
  10. Pep Joe

    C9 Cat engine performance without FLS, FTS and injectors trim code programmed

    What is engine performance without FLS and FTS codes programmed and without injectors trim codes programmed? Am asking cos today i connected a Cat ET to a C9 (sn:thx00719) and found they were not programmed. Engine working fine but has active codes for the none programmed parameters. the engine...
    • Pep Joe
    • Thread
    • bulldozer engine
    • Replies: 8
    • Forum: Dozers
  11. Pep Joe

    Bomag soil stabilizer s/n 101590041070

    please i need a help on why i can't get boost pressure on this machine. the engine model is Deutz TCD2015. The boost sensor is also the boost temperature sensor called on the manual "sensor for charge air temperature and charge air pressure" . i get boost pressure when i loosed the sensor and...
  12. Pep Joe

    Articulated truck D350E an: 2xw00431 steering won't steer

    Please I need your help on how to fix this truck steering problem. It won't steer. Thanks
    • Pep Joe
    • Thread
    • trucks caterpillar automobile technician
    • Replies: 5
    • Forum: Trucks
  13. Pep Joe

    3406E cat engine injectors trim file calibration

    Please I need you to help me on the procedure to perform injectors trim file calibration on 3406E with sn: BET13139 A friend is referring me to go help a truck owner that just bought complete injectors on his D350E truck to do the calibrations, i have not done it before. thanks.
    • Pep Joe
    • Thread
    • truck d350e 3406e caterpillar
    • Replies: 12
    • Forum: Trucks
  14. Pep Joe

    Need help to locate 320BL excavator hammer solenoid location and how the hammer circuit work

    Please I need you to help me on what to do to get the hammer working. I was called to fix the no hammer working. I found out it's an attachment but the owner said they have used the excavator for hammer before. Now when you step on the foot pedal for the hammer it will be raising the boom...
  15. Pep Joe

    Need help to locate 320BL excavator hammer solenoid location and how the hammer circuit work

    Please I need you to help me on what to do to get the hammer working. I was called to fix the no hammer working. I found out it's an attachment but the owner said they have used the excavator for hammer before. Now when you step on the foot pedal for the hammer it will be raising the boom...
  16. Pep Joe

    950G WHEEL LOADER NOT MOVING FOWARD OR REVERSE

    Please your help on why a 950G wheel loader sn: 5FW01259 not engaging forward or reverse gears. It was moving fine before. the operator packed it but later started it to work but it refuse to move in either direction. I went to monitor the status with CAT ET but find one xmsn active code 621-...
  17. Pep Joe

    Bomag soil stabilizer s/n 101590041070

    Please I need a help on how to test voltage to the injector pump solenoids. I don't think ecm is energizing them but I want to be sure. Three out of the six injectors share a common positive and so for the other three but each with a negative supply. I want to know if I can measure the positive...
  18. Pep Joe

    Telehandler TH580B stabilizer not lower or raise

    please I need your help on what to do to fix this problem. The s/n prefix is SLH. Attached is the machine configuration. Thanks
Top